Samsung C24A650X User Manual page 44

2
Using "Central Station"
Static IP User
1
Set the LAN network for the notebook PC to Do not use.
2
Go to Control Panel
adapter settings. Next, right-click on the notebook PC's network device and select Do not use.
3
Right-click on the Central Station monitor's network device (marked "LAN9512/LAN9514 USB 2.0
to Ethernet 10/100 Adapter #7"), and select Use.
Be sure to perform this process before configuring the IP.
4
Configure the static IP. Assign the static IP that is allotted to the Central Station monitor's network
device.
Go to Control Panel
adapter settings. Next, right-click on the Central Station monitor's network device (marked
"LAN9512/LAN9514 USB 2.0 to Ethernet 10/100 Adapter #7"), select Properties
Protocol Version 4 (TCP/IPv4)
Network and Internet
→
→ Network and Internet
→ Properties, and configure the static IP and DNS settings.
Network and Sharing Center
→
→ Network and Sharing Center
2 Using "Central Station"
Change
→
→ Change
→ Internet
44