Advertisement

Quick Links

Be sure to read this manual before use

Notes on Usage

• In this manual, the "AQUOS SERIE SHL25" is abbreviated as the "SHL25"
or the "product".
• In this manual, "microSD™ memory card (commercially available)",
"microSDHC™ memory card (commercially available)" and "microSDXC™
memory card (commercially available)" are abbreviated as "microSD
memory card" or "microSD".
• For illustrations and descriptions in this manual, refer to "Basic Manual"
available on the au homepage and on the product.
May 2014, 1st Edition

Advertisement

Table of Contents
loading

Summary of Contents for AU Aquos SHL25

  • Page 1: Notes On Usage

    “microSDHC™ memory card (commercially available)” and “microSDXC™ memory card (commercially available)” are abbreviated as “microSD memory card” or “microSD”. • For illustrations and descriptions in this manual, refer to “Basic Manual” available on the au homepage and on the product. May 2014, 1st Edition...
  • Page 2 Exemptions • The Company is not liable for any damages arising from earthquakes, lightning, storms, floods or other natural disasters, as well as fires, actions by third parties, other accidents, intentional or mistaken operation by the customer, or use under other unusual conditions outside the responsibility of the Company.
  • Page 3: Safety Precautions (Observe Strictly)

    Safety Precautions (Observe Strictly) ■ Before using the product, thoroughly read these safety precautions for proper use. After reading, store the precautions in a safe place. These “Safety Precautions” describe instructions that should be observed to prevent damage to property or injury to the customer or others using the product.
  • Page 4 ■ Precautions Common to the Main Unit, Charger, au Nano IC Card (LTE), Peripheral Devices DANGER Be sure to read the following hazards before use. Be sure to use only the specified peripheral devices. Use of other peripheral devices might cause overheating, ignition, rupture, fault, or leakage of liquid.
  • Page 5 Before entering an area where flammable gas is generated such as a gas station, be sure to turn off the product. Do not charge the battery. Failure to observe these precautions might cause the gas to catch fire. Instruction ® In addition, when using Osaifu-Keitai payment function at a gas ®...
  • Page 6 Although the product has waterproof capability, do not use if liquid such as water gets inside the product from the au Nano IC Card Wetting (LTE)/microSD memory card cover, etc. Continued use of the with water product in this state might cause overheating, ignition or a fault.
  • Page 7 Do not leave in places within the reach of small children. Small children might swallow part of the equipment by mistake and choke on them, or might drop them by mistake and cause accidents or injury. Prohibited CAUTION Be sure to read the following cautions before use.
  • Page 8 Keitai Guarantee Service Center. Also, if you have dropped or damaged the product, do not continue to use it in that state, and contact an au shop or Keitai Guarantee Service Center.
  • Page 9 ■ Main Unit DANGER Be sure to read the following hazards before use. Do not puncture the product with a nail, hit it with a hammer or step on it. Doing so might cause leakage, overheating, rupture or ignition of Prohibited the internal battery.
  • Page 10 When using the product near an implanted pacemaker, implanted cardioverter-defibrillator or other electronic medical device, radio waves might affect these units and devices. So, please observe the Instruction following. 1. Those with an implanted pacemaker or implanted cardioverter- defibrillator should carry or use the product at least 15 cm away from where the implant is.
  • Page 11 Stay alert to your surroundings when calling, messaging, browsing the Internet, shooting photos, playing games, watching TV or listening to music. Failure to do so might cause a fall or traffic Instruction accident. Do not send data by infrared communication with the infrared port pointing toward eyes.
  • Page 12 Elastomer resin None memory card cover (hinge) au Nano IC Card (LTE)/microSD Silicon rubber None memory card cover (seal) au Nano IC Card (LTE) tray PC + ABS resin None IMEI tray POM resin None Earphone/Microphone jack PC + ABS resin...
  • Page 13 Part Material Surface treatment TV antenna (tip) Brass Trivalent chrome plating TV antenna (tube) Stainless steel None TV antenna (element) Nickel-titanium alloy None TV antenna (elbow hinge) Stainless steel Nickel plating TV antenna (attaching part) Stainless steel Trivalent chrome plating Power key Aluminum Diamond cut,...
  • Page 14 Use the product with the au Nano IC Card (LTE)/microSD memory card cover closed. If the cover is open, dirt or water may get inside causing a fault. Instruction Stow the TV antenna when not watching TV. If you use the product for a call, etc.
  • Page 15 Failure to do so might cause overheating, ignition, rupture or leakage. Since the battery is built-in type, the product will be kept at an au shop etc. and charges will be incurred for repair. Also, you may not use the product in certain period of time.
  • Page 16 ■ Charger WARNING Be sure to read the following warnings before use. Do not use at other voltages than the specified power supply voltage. Doing so might cause ignition, fire, overheating or electric shock. • Specified AC adapter (sold separately): 100 V AC to 240 V AC Prohibited Do not charge with voltage converter for overseas travel.
  • Page 17 Before cleaning the specified charger (sold separately), unplug its power plug from the outlet or cigarette lighter socket. If the plug Disconnect remains plugged in when you clean the charger, it might cause plug from electric shock or short circuit causing fire, a fault, or injury. power outlet Wipe off dust on the power plug.
  • Page 18 Be sure to read the following warnings before use. Do not put the au Nano IC Card (LTE) in a cooking apparatus such as a microwave oven or a pressure vessel. Doing so might cause melting, overheating, fuming, loss of data or a fault.
  • Page 19 Doing so might cause melting, fuming, loss of data or a fault. Prohibited Do not throw the au Nano IC Card (LTE) into a fire or heat it. Doing so might cause melting, fuming, loss of data or a fault. Prohibited Do not touch the IC (metal) part of the au Nano IC Card (LTE) or short-circuit it.
  • Page 20 Store the au Nano IC Card (LTE) out of reach of small children. Accidental swallow might cause asphyxiation, injury, etc. Instruction - 19 -...
  • Page 21: Handling Precautions

    ● To ensure waterproof property (equivalent to IPX5 and IPX7) of the product, use the product with the au Nano IC Card (LTE)/microSD memory card cover tightly closed. Note that the waterproof property is not guaranteed in every usage condition.
  • Page 22 • SHL25 • au Nano IC Card (LTE) (inserted into the SHL25) ● Do not use in places subject to lots of dust or vibration. ● Clean the product with a soft dry cloth (such as the type used for eyeglasses).
  • Page 23 • Operation with water drops left or condensation formed on the surface • Operation with wet or sweaty fingers • Operation under water ● Never use modified au cell phones. Use of a modified device violates the Radio Law. You can perform the following operations to confirm the unique authentication and standard marks (including certification/authentication numbers) for the product.
  • Page 24 ● Contents saved in the product, such as contacts, mails and bookmarks might be altered or lost by an accident, fault, repair or mishandling. Be sure to keep a copy of important contents. Note that the Company assumes no responsibility for any damages or lost profits resulting from altered or lost contents.
  • Page 25 This may cause the display to remain on, allowing the call to be disrupted if the display is accidentally touched. ● If the display gets damaged, immediately stop use and contact an au shop or Keitai Guarantee Service Center. Keeping using it may cause injury.
  • Page 26: Touch Panel

    ● If you put magnetized objects, metal straps, etc. close to the product, the speaker section sometimes emits sounds. This is not a fault. ● Note that if you forcefully pull the au Nano IC Card (LTE)/microSD memory card cover or apply excessive force on it, it may be damaged.
  • Page 27 Since the battery is built-in type, the product will be kept at an au shop etc. and charges will be incurred for repair. Also, you may not use the product in certain period of time. Note that the length of service life varies depending on the usage condition, etc.
  • Page 28 Doing so might result in draining of the car battery. ■ au Nano IC Card (LTE) ● The au Nano IC Card (LTE) is lent to you by au. In case of loss or damage, the card will be replaced at your expense. When malfunction is suspected, or in case of theft or loss, contact an au shop or PiPit.
  • Page 29 ■ Camera ● If the camera lens cover breaks, immediately discontinue use, and contact an au shop or Keitai Guarantee Service Center. Continued use may cause injury. ● When using the camera, follow common rules of etiquette regarding camera use.
  • Page 30 ■ Copyrights and rights of portrait ● If the data you shot or recorded using the product or the data you downloaded from the Internet etc. is in part or in whole protected by the third party’s copyright, you are not allowed to copy, distribute, publicly send, modify the data without consent of the copyright holder, except for personal use, under the copyright law.
  • Page 31: Available Security Codes

    To set and release restriction on voice calls, etc. Initial value 1234 ■ PIN code Example of usage To prevent unauthorized use of the au Nano IC Card (LTE) by third parties Initial value 1234 ■ Lock No. (NFC/Osaifu-Keitai lock)
  • Page 32: Pin Code

    ■ PIN Code To prevent unauthorized use of the au Nano IC Card (LTE) by a third party, you can set the product to require PIN code entry every time the power is turned on. You also need to enter PIN code when setting whether PIN code entry is required.
  • Page 33: Notes On Waterproof Property

    The product has a protection rating (JIS C 0920) for waterproof property equivalent to IPX5 and IPX7 on the condition that the au Nano IC Card (LTE)/microSD memory card cover is securely closed (Based on the experiments by the Company).
  • Page 34 Even a fine obstacle (one hair, one grain of sand, tiny fiber, etc.) put between contact surface may cause intrusion of water. • If liquid such as water is splashed onto the product with the au Nano IC Card (LTE)/microSD memory card cover opened, the liquid may seep inside and cause electric shock or fault.
  • Page 35 ■ Notes on Using the Product • Do not let the product get wet with or submerged into the following liquids. ・ Water containing soap, detergent or bath powder ・ Seawater or water from a swimming pool ・ Hot spring, hot water, etc. •...
  • Page 36 Grains of sand may get into the earpiece, speaker, etc., causing the volume to drop. • If the au Nano IC Card (LTE)/microSD memory card cover degrades or is damaged, the waterproof property cannot be maintained. In such case, contact an au shop near you.
  • Page 37 ■ Maintaining the Waterproof Property ■ Rubber seal The rubber seal on the au Nano IC Card (LTE)/microSD memory card cover is important to maintain the waterproof property. Be sure to observe the following items. • Do not remove or scratch it.
  • Page 38 6 liters/min) of tap water at room temperature (5°C to 35°C) approximately 10 cm away from the faucet or shower head. Hold the au Nano IC Card (LTE)/microSD memory card cover so that it does not open, and wash the product with your hands without using a brush or sponge.
  • Page 39: Draining Water

    ■ Draining Water If the product gets wet, make sure to drain water remaining in the “earphone/ microphone jack section”, “external connection jack section”, “earpiece (receiver) section”, “mouthpiece (microphone) section”, “speaker section”, “key section”, “TV antenna section”, etc. Wipe off water on the surface of the product carefully with a dry and clean cloth etc.
  • Page 40 Hold the product securely and shake it approximately 20 times until there is no more water splashing. Make sure of the safety around you and shake the product while holding it securely not to let it drop. Earpiece (Receiver) section Mouthpiece (Microphone) section Recording microphone section...
  • Page 41 Earphone/Microphone Key section jack section External connection jack section - 40 -...
  • Page 42 Wipe off water remaining in the grooves of each section by gently putting the product against a dry and clean cloth etc. Since water is sometimes left in the grooves of each section, clear them of water by putting a cloth against their openings and gently patting them. Make sure that there is no more water or foreign objects remaining in them.
  • Page 43: Frequency Band

    ® Notes on Using Bluetooth /Wireless LAN ® (Wi-Fi ) Functions Frequency Band ® ® Bluetooth and wireless LAN (Wi-Fi ) functions (2.4 GHz band) of the product use frequencies in the 2.4 GHz band ranging from 2.402 GHz to 2.480 GHz. You can perform the following operations to confirm information on frequency band.
  • Page 44: Precautions About Bluetooth

    “other wireless stations”, immediately either relocate the product or stop operation of the device (stop emission of radio waves). 3. If you are unclear on any points or are troubled by anything, contact an au shop or Customer Service Center. - 43 -...
  • Page 45: Precautions About Wireless Lan

    “other wireless stations”, immediately either relocate the product or stop operation of the device (stop emission of radio waves). 3. If you are unclear on any points or are troubled by anything, contact an au shop or Customer Service Center.
  • Page 46 ■ 5 GHz band wireless LAN (Wi-Fi ® ) function precautions In the 5 GHz frequency band, three channels of 5.2 GHz/5.3 GHz/5.6 GHz band (W52/W53/W56) are available. • W52 (5.2 GHz band/36, 40, 44, 48 ch) • W53 (5.3 GHz band/52, 56, 60, 64 ch) •...
  • Page 47: Notes On Packet Communication Charge

    In addition, operation procedures described in the “Basic Manual” available on the au homepage and on the product, “Notes on Usage” (this manual) or “Setting Guide”/“Full Instruction Manual”...
  • Page 48: Export Administration Regulations

    Export Administration Regulations The product and its accessories may be subject to the Japan Export Administration Regulations (“Foreign Exchange and Foreign Trade Law” and its related laws). In addition, U.S. Re-export Regulations (Export Administration Regulations) may apply to the product and its accessories. To export and re-export the product and its accessories, take the required measures on your responsibility and at your expenses.
  • Page 49 • Wi-Fi ® ® is a registered trademark of Wi-Fi Alliance • Wi-Fi Protected Setup™ and Wi-Fi Protected Setup logo are trademarks of ® Wi-Fi Alliance The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance. • Wi-Fi Direct™ is a trademark of Wi-Fi Alliance ®...
  • Page 50 • FeliCa is a contactless IC card technology developed by Sony Corporation. FeliCa is a registered trademark of Sony Corporation. • & is a registered trademark of FeliCa Networks, Inc. • Twitter and Twitter logo are trademarks or registered trademarks of Twitter, Inc.
  • Page 51 • Copyright © 2010 - Three Laws of Mobility. All Rights Reserved. • The “RSA Secure” AND “Genuine RSA” logos are trademarks of RSA Data Security, Inc. • DLNA ® , the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance.
  • Page 52 • “笑顔フォーカスシャッター”, “振り向きシャッター”, “NightCatch/ナイト キャッチ”, “スマートファミリンク/Smart Familink”, “翻訳ファインダー”, “翻 訳キャプチャー”, “多焦点撮影”, “AQUOS/アクオス” and the “AQUOS” logo, “セリエ/SERIE”, “AV家電リンク”, the “エコ技” symbol, “アウトドアビュー”, “ワンタッチシャッター”, the “SHSHOW” logo, “Bright Keep”, “Sweep ON”, “Social Board”, “スロートーク/Slow Talk”, “パーソナルコレクトボード/ Personal Collect Board”, “ウェルカムシート/Welcome Sheet”, “フレーミング アドバイザー/FramingAdviser”, “Feel UX”, “...
  • Page 53 • Dynastream and ANT are registered trademarks of Garmin and its affiliates in the US and other countries. ANT+™, the ANT+ logo and the ANT+ CAPABLE logo are registered trademarks of Garmin and its affiliates in the US and other countries. - 52 -...
  • Page 54: Open Source Software

    ■ Open Source Software • The product includes software based on GNU General Public License (GPL), GNU Lesser General Public License (LGPL) and other licenses. For details on licenses of related software, on the home screen, “Apps Sheet” → [Settings] → [Device info] → [Legal information] → [Open source licenses].
  • Page 55 【Original SSLeay License】 Copyright © 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com) THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  • Page 56 ■ More The software installed on this product or part of it may not be altered, translated/adapted, reverse-engineered, decompiled or reverse-assembled and any such actions are prohibited. Under the MPEG-4 Visual Patent Portfolio License, customers have licensed permission for the following use of this product to engage in non-profit personal use.
  • Page 57 This product is licensed under the MPEG-4 Visual Patent Portfolio License for the personal and non-commercial use of a consumer to (i) encode video in compliance with the MPEG-4 Video Standard (“MPEG-4 Video”) and/or (ii) decode MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a licensed video provider.
  • Page 58: For Inquiries, Call

    From au cell phones: area code not required Pressing “zero” will connect you to an operator, after calling “157” on your au cellphone. For service cancelation procedure in case of loss or theft (toll free) Business hours: 24 hours (7 days a week) From fixed-line phones:...

Table of Contents