Table of Contents
Advertisement
ENVR8304E-8CH
Note: The internal power cable is connected to the Main board inside the NVR. The power
cable features two connectors, which can be used to connect to two HDDs.
6. Screw the HDDs with the brackets inside the NVR using the Washer Head Screws.
7. Screw back the housing to the NVR.
2.2 Rack Mount
To install rack ears on the NVR, use the supplied two Rack Ears and the four M3 (φ6.8) Screws
for rack mount installation on both side.
8
Advertisement
Table of Contents
