Table of Contents
Advertisement
3. Basic Connection
The instructions below describe the basic connection for ENVR8304E-8CH
1
Power Cord
1. Using the supplied Power Cord, connect one end to the 100-240 VAC~ port on the NVR and
the other end to the 100-240 VAC~ power outlet.
2. To view videos, connect a monitor to the HDMI or VGA port using the HDMI or VGA cable
supplied by the monitor manufacturer.
3. Connect the IP cameras to the 1~8 camera ports using RJ-45 CAT5 10/100Mb Ethernet cables
without separate power sources. Please see 2.3.1 Camera Connection for more details.
4. To manage the NVR over network, use a standard RJ-45 CAT5 10/100/1000Mb Ethernet cable
to connect the WLAN port of the NVR to the network. Please refer to 2.5 Connecting the NVR
to the Network.
5. Connect the LAN port of the NVR to the Uplink port using the supplied RJ-45 CAT5
10/100/1000Mb Ethernet cable. Please see 2.3.1 Camera Connection for more details.
6. Optionally connect a mouse or a keyboard (EKB200) to the NVR to control the system. You
can also control the system using the supplied IR Remote Controller.
7. Connect a microphone to the Audio-in RCA socket of the NVR. Note that the microphone
with a (built-in) amplifier and external power supply is required.
8. To listen to audio of video source, connect a speaker to the Audio-out RCA socket. Note that
the speaker with a (built-in) amplifier and external power is required.
IP Cameras 1 ~ 8
3
2
Main Monitor
Main Monitor
(HDMI)
(VGA)
Web Remote
Client
Mouse &
EKB200 Keyboard
6
5
4
Network
PowerVideo Plus
(CMS)
9
ENVR8304E-8CH
Line Level
7
Audio In
8
Line Level
Audio Out
Advertisement
Table of Contents
