Brother p-touch d600 User Manual page 6

INTRODUCTION
Do not use a damaged or leaking
battery as the fluid may get on
your hands.
Do not use a deformed or leaking
battery or one whose label is
damaged. There is a possibility
of it generating heat.
Do not touch metal parts around
the print head immediately after
printing.
When the P‑touch is not being
used, store it out of the reach of
children. In addition, do not allow
children to put any P‑touch parts
or labels in their mouths. If any
object has been swallowed, seek
medical attention.
Follow these guidelines to avoid personal injury, liquid leakage, burns or heat.
If leaked fluid from batteries gets
on your skin or clothes, immediately
rinse them with clean water.
Remove the batteries and
disconnect the AC adapter if you
do not intend to use the P‑touch.
Do not use a battery other than that
specified. Do not use combinations
of old and new batteries or
combinations of different types,
different charging levels, different
manufacturers or different models.
Do not insert a battery with the
polarity (+ and ‑) reversed.
Do not drop or hit the P‑touch/
AC adapter.
Do not press on the LCD display.
Do not put your finger inside the
P‑touch when you close the tape
compartment cover or battery
compartment cover.
4
Safety Precautions
WARNING
Do not use a damaged adapter
cord or power plug.
Do not use the P‑touch if a foreign
object enters the P-touch. If any
foreign object enters the P-touch,
disconnect the AC adapter and
remove the batteries, and contact
Brother customer service.
DO NOT touch the blade of the
cutter unit.
CAUTION
Before using Ni‑MH rechargeable
batteries, carefully read the
instructions for the batteries and
battery charger, and be sure to use
them correctly.
When using Ni‑MH rechargeable
batteries, charge the batteries with
a specialised battery charger
before using the batteries.
DO NOT open the tape
compartment cover when
operating the cutter unit.
DO NOT apply excessive pressure
to the cutter unit.