Brother p-touch d600 User Manual page 43

Setting
• Automatically cuts a piece of blank
tape before printing the first label and
then cuts the tape after each label is
printed, leaving a 2 mm margin at both
Chain
ends of each label.
• Once the last label is printed, the tape
is not fed and cut. Press (
( ) to feed and cut the tape.
• Select this setting when printing
multiple copies of a label and you do
not want the labels cut after each label
is printed, or when using Fabric Tapes
or other special tapes that cannot be
cut by the tape cutter of the P‑touch.
• Once the label is printed, the tape is
not fed and cut.
No Cut
ž Press (
cut the tape.
ž
When using the special tapes that
cannot be cut by the tape cutter of
the P‑touch, remove the tape
cassette from the P‑touch and use
scissors to cut the tape.
• Select this setting when using special
tape.
• When using Fabric Tapes or Heat
Shrink Tube, select [Special tape] for
Cut Options before printing. After
printing, remove the tape cassette
from the P‑touch and use scissors to
cut the tape.
Special
tape
Description
) and ( ) to feed and
ABC
2 mm
24.5 mm
) and
ABC AB
24.5 mm
• When multiple copies are
printed one time:
ABC ABC ABC
24.5 mm
• When a label is printed
two times:
1
ABC ABC
24.5 mm
1. 1st print
2. 2nd print
Setting Tape Cutting Options
LABEL PRINTING
Example
ABC
2 mm
4 mm
4 mm 4 mm
2
26.5 mm
41