Special Rules; Specifications - Ryobi CPL-180 User Manual

GB
FR DE ES IT

SPECIAL RULES

Wait for the cutter to stop before setting the tool
down. An exposed cutter may engage the surface
leading to possible loss of control and serious injury.

SPECIFICATIONS

Voltage :
No load speed :
Max. planing depth :
Max. planing width :
Max. rabbet depth :
BATTERY PACK
MODEL
(not included)
BPL-1820
BPL-1815
RB18L13
RB18L15
RB18L26
RB18L40
CPL-180
BPP-1815
BPP-1813
BPP-1817
DESCRIPTION
1. Wrench
2. Depth Adjust Knob
3. Trigger Switch
4. Rear Handle
5. Lock-off Button
6. Dust Bag
7. Kick Stand
8. Blade
9. Edge Guide
10. Collar
11. Battery Pack (Not Included)
12. Latch
13. Bracket
14. Knob Bolt
15. Knob Nut
16. Carriage Head Bolt
17. Front Shoe
18. Blade Clamp
19.Blade Holder
20. Belt Cover
21. Large Pulley
22. Small Pulley
961067224-02(CPL-180 EU manual).indd Sec1:1
NL PT DK SE FI NO
English
18V
10,000 /min
0.4 mm
50.8 mm
12.7 mm
CHARGER
(not included)
BCS618
BCL1418
BCL14181H
BCL14183H
BCA-180
BC-1815S
BC-1800
BCS618
BCL1418
BCL14181H
BCL14183H
RU PL CZ HU RO LV
FEATURES
WARNING
If any parts are missing, do not operate your
planer until the missing parts are replaced.
Failure to do so could result in possible serious
personal injury.
KNOW YOUR PLANER
Before attempting to operate your planer, familiarize
yourself with all operating features and safety
requirements. However, do not let familiarity with the tool
make you careless.
Your planer is compact and lightweight. It is equipped
with the following features:
SWITCH
The planer has a conveniently located trigger switch.
LOCK-OFF
The lock-off button locks the trigger switch in the OFF
position when the trigger switch is released.
WARNING
Do not allow familiarity with your planer to make
you careless. Remember that being careless a
fraction of a second is sufficient time to inflict
severe injury.
DEPTH ADJUSTMENT
Adjust the planing depth from 0 to 0.4 mm in 0.1 mm
increments and the last step meet to the maximum depth
0.4 mm.
KICK STAND
Your planer is fitted with an automatic retracting
kick stand to prevent the blade from contacting the
workbench on run down.
The kick stand will automatically retract as it passes over
the edge of the workpiece when you commence planing
operation.
EDGE/REBATE GUIDE
The edge guide included allows you to plane edges and
make rebate cuts.
DUST BAG
The dust bag attaches to the planer and helps keep the
work area free of dust and debris.
1
LT EE HR SI SK GR
12/29/09 4:17:26 PM
TR