Step 5 - Install Genius™ Configuration Program - Datalogic DS4800 Reference Manual

1
STEP 5 – INSTALL GENIUS™ CONFIGURATION PROGRAM
™
Genius is a Datalogic scanner configuration tool providing several important advantages:
•
Wizard approach for new users;
•
Multi-language version;
•
Defined configuration directly stored in the reader;
•
Communication protocol independent from the physical interface allowing to consider the
reader as a remote object to be configured and monitored.
To install Genius™, turn on the PC that will be used for the configuration, running
Windows 98, 2000/NT, XP or Vista, then insert the Genius™ CD-ROM, wait for the CD to
autorun and follow the installation procedure.
This configuration procedure assumes scanner connection to a CBX100/500. Genius™,
running on a laptop computer, is connected to the scanner auxiliary port through the
CBX100/500 9-pin connector.
Wizard for Quick Reader Setup
After installing the Genius™ software program the following window appears asking the user
to choose the desired configuration level.
The Wizard option is advised for rapid configuration or for new users, since it shows a step-
by-step scanner configuration.
10
Figure 9 - Genius™ Wizard Opening Window
DS4800 REFERENCE MANUAL