Universal Remote Control WR7 Owner's Manual page 16

STEP 5: You can continue learning all other
buttons from your old remote by pressing the
next button on the WR7 and repeating this
step.
Note: The component light will blink five times if
there was an error in the learning process. In
this case, please repeat Steps 3and 4.
STEP 6: Save your work. Once the WR7 has
learned all the buttons for the selected
component, press and hold the Component
button and ENTER [ENT] buttons at the same time
to save the learned functions. The component
light will blink three times to confirm the set up.
COMPONENT
BUTTONS
Check your work. Test all the buttons to make
sure they learned correctly. Repeat Steps 1-5 to
set up any other component modes.
We love to e-mail!
PLEASE CONTACT OUR TECHNICAL
E-MAIL: techsupport@UniversalRemote.com
Phone: 1-800-901-0800 (9:00AM - 6:00PM
EST Monday - Friday)
PLEASE DO NOT RETURN
THIS PRODUCT TO THE STORE
Page | 15
SUPPORT CENTER.
ENTER
BUTTON