Installation And Removal Of The Lens Port (Ppo-Ep01/Ppo-E02: Optional) - Olympus PT-EP11 User Manual

Installation and removal of the lens port (PPO-EP01/PPO-E02: optional)

This Case can be used by mounting the waterproof port for lens on the front of the Case.
For PPO-EP01
Installation
Fit the part (1) of the lens port into the concave part in the left side of the port ring.
Then, turn the port ring (2) to lock.
Make sure that the port ring is locked.
Removal
Turn the port ring (4) while sliding the slide lock of the port ring (3).
Then, remove the lens port.
For PPO-E02
A underwater port adapter (PAD-EP08: optional) is required when using the underwater lens port for the
PT-E series.
Installation
Gently screw the port adapter in a clockwise direction into the lens port (1).
Fit the left and right protrusions of the port adapter into the concave parts of the port ring (2).
Turn the port ring to lock.
Make sure that the port ring is locked.
EN
Removal
Turn the port ring while sliding the slide lock of the port ring.
Remove the lens port from the port adapter.
Turn the port adaptor to remove from the lens port.
EN 9
2
1
1
2
1
3
4