Softbutton-Main Source Selection - TANDBERG C20 User Manual

What's in this guide? Getting started
Softbutton—Main source selection
If you want direct access (via the softbuttons along the bottom line of
the screen) to the source used, you should assign the function Main
source selection to one of the softbuttons. In the following we will use
S 1 as an example, but the function may be assigned to any of
OFTBUTTON
the five softbuttons.
Do as follows:
1. Navigate down to the softbuttons options as shown on page 34. Make
sure you have decided whether your setting shall apply to idle or in
call. If you want it to apply to both situations you must do this twice,
one setting for each case—see the tip on page 34 for more on this.
Expand the Main source selection menu.
2.
3. Use the keys to go between the options—Camera or
VERTICAL ARROW
PC as main source.
D14503.01 USER GUIDE TANDBERG QUICK SET C20—July 2009
Making calls Using the phone book
4. Press the
LEFT ARROW
Below is a screenshot showing how the softbuttons appear when
assignments have been made.
35
In-call features
key to exit the menu putting changes into effect or the
key to leave the menu going one step back.
If you have set S 1 to PC as main source, you may want
OFTBUTTON
to set S 2 to Camera (or the other way around) in order
OFTBUTTON
to be able to conveniently switch between the two.
Advanced settings
Advanced settings