Bestview-Face Recognition; Using Best View; Where To Find It - TANDBERG C20 User Manual

Getting started
What's in this guide? Getting started
BestView—Face recognition
The TANDBERG Profile is capable of doing face recognition.
The face recognition system aims to search for faces in order to optimize
the picture frame, and is therefore called BestView. Once a face or
group of faces has been detected camera zoom and camera angle will be
changed accordingly to obtain an optimal representation on the screen.
Kindly observe the following:
The Best view feature is still a preview feature.
The Best view optimization process may take up to 5 seconds.
The detection of faces works better when people look towards the
camera.
The area from the eyebrows down to just below the lips should be
uncovered.
Beard is normally not a problem.

Using Best view

1. Press the key on the remote control to display the Layout menu.
Select Selfview to be shown as required.
2. Press the key on the remote control to display the Home menu and
select Camera control
This will cause softbuttons to appear. Press the F
3.
corresponding to Camera presets and navigate to Best view.
on the remote control to start the Best view optimization
4. Press
process. Look towards the camera for about five seconds
5. The system will now look for faces and adjust the zoom and camera
angle to obtain a best fit.
D14503.01 USER GUIDE TANDBERG QUICK SET C20—July 2009
Making calls Using the phone book
key
UNCTION
12
In-call features
Where to find it
The softbuttons
shown are produced
via the Camera
control menu.
Advanced settings
Use this
softbutton to
exit.