Hyundai HYBC5200 User Manual page 22

8.3. Remove all fuel from the fuel tank.
8.4. After all the fuel is drained, start the engine.
8.5. Allow the engine to run in idle until engine stops alone. This allows the fuel to be
removed from the carburetor.
8.6. Allow engine to cool down (about 5 minutes).
8.7. Use a spark plug wrench, remove the spark plug.
8.8. Pour 1 teaspoon of clean 2-cycle oil into the combustion chamber. Slowly pull
the starter rope several times to coat internal components. Replace the spark
plug.
8.9. Store the machine in a cool, dry place away from any source of ignition such
as an oil burner, water heater etc.
8.10. Transporting the machine.
8.10.1. When transporting the machine make sure that no fuel is allowed to leak
out.
8.10.2. DO NOT allow the trimmer/brush cutter come into contact with persons,
animals and property.
Page 22