Hyundai HYBC5200 User Manual page 14

4.7. Notes on working with the brush cutter (metal blade).
4.7.1. A metal blade with 3 teeth is delivered with the machine. This is used for
cutting of bushes and weeds. The use of a saw blade with this machine is
prohibited.
Do not cut with blunt, cracked or damaged metal blade. Before starting
work, check the area for obstacles such as stones, metal rods or other
objects. If these cannot be removed, mark this position, so you can
avoid contact with the blade and objects. Overhead power lines can
be caught on the blade head if machine is swirled in the air.
Do not use the brush cutter for the cutting of trees.
In addition, you should wear head, eye, face and hearing protection,
safety shoes. Do not wear rings and jewelry or loose, dangling
clothing that could get caught in the machine. Do not wear footwear
with unprotected toes and do not work barefoot or without leg
protection. In certain situations, you have to wear head protection.
4.8. Wearing the shoulder harness.
4.8.1. You MUST;
4.8.1.1. Always wear the provided to harness, when you use the machine!
4.8.1.2. Make sure that the machine is securely hooked onto the strap.
4.8.1.2.1. If you do not, you will not be able to control the machine safely.
4.8.1.2.2. This may result in injury to yourself or other people.
4.8.1.3. NEVER use a harness with a defective quick release or other damage.
4.8.2. Fit harness (a) over shoulders making sure that it is not damaged or
twisted. Connect buckle (b) and adjust to suit. Attach the quick release
plate (c)(1) and make sure that it functions correctly. Attach machine (d) to
quick release plate. To release harness operate the release buckle (e) (2).
Page 14