Table of Contents
Advertisement
QQ
3 7 63 1515 0
[CD SHIP MODE (WITHOUT MEMORY CLEAR)]
• This mode moves the optical pick-up to the position durable
to vibration. Use this mode when returning the set to the
customer after repair.
Procedure:
1. Press
button to turn on the set.
?/1
2. Select CD function.
3. Press [CD] button and
will turn off automatically.
4. After the "STANDBY" blinking display finishes, a message
"MECHA LOCK" is displayed on the fluorescent indicator
tube and the CD ship mode is set.
[CD POWER MANAGE]
• This mode let you switch on or off power supply to the BU
during TUNER function.
• When CD POWER is set to OFF, the power supply to the BU
is cut off during TUNER function. It will increase the time
taken to access CD when function change from TUNER to
CD but it will improve tuner reception.
• When CD POWER is set to ON, the power supply to the BU
is not cut off during TUNER function. It will reduce the time
taken to access CD when function change from TUNER to
CD but it will decrease tuner reception performance.
Procedure:
1. Press
button to turn on the set.
?/1
2. Select CD function.
TE
L 13942296513
3. Press
button to turn off the set.
?/1
4. Press x button and
will turn on automatically.
5. The message "CD POWER ON" or "CD POWER OFF" will
be displayed on the fluorescent indicator tube.
www
.
http://www.xiaoyu163.com
button simultaneously. The set
?/1
button simultaneously. The set
?/1
x
ao
u163
y
i
http://www.xiaoyu163.com
2 9
8
[CD TRAY LOCK MODE]
• This mode let you lock the disc tray. When this mode is
activated, the disc tray will not open when
button or [DISC SKIP/EX-CHANGE] button is pressed. The
message "LOCKED" will be displayed on the fluorescent
indicator tube.
Procedure:
1. Press
?/1
2. Select CD function.
3. Press x button and
simultaneously and hold down until "LOCKED" or
"UNLOCKED" displayed on the fluorescent indicator tube
(around 5 seconds).
[TCM OFFLINE MODE]
• This mode prevents set from power off automatically when
TCM is not connected.
Therefore, measurements can be done even when TCM is not
connected during production.
• Procedure:
1. When the set in turned off, press [EQ BAND/MEMORY]
button, [TAPE A/B] button and
The set will turn on automatically.
2. The message "TCM OFFLINE" will be displayed on the
fluorescent indicator tube.
Q Q
3
6 7
1 3
1 5
co
.
HCD-GNX660
9 4
2 8
Z
button to turn on the set.
button
Z
OPEN/CLOSE
?/1
button simultaneously.
0 5
8
2 9
9 4
2 8
m
9 9
OPEN/CLOSE
9 9
19
Advertisement
Table of Contents
