Viking K-1900-8-IP Product Manual page 7

Hide thumbs Also See for K-1900-8-IP:
Table of Contents

Advertisement

Typical Installation on SIP Based VoIP Phone System
Viking
K-1900-8-IP
VoIP Phone
Customer's
Responsibility
Viking supplies
* Note: A PoE extender can be used for an additional 100 meters per extender. For longer runs (up to 2 km / 1.2 miles)
a ethernet to fiber media converter can be used.
• IBM compatible personal computer with:
Windows 2000 (service pack 4 or higher)
Windows XP (service pack 2 or higher)
Windows Vista (SP2 or newer), 32 or 64 bit versions
Windows 7
Windows 8
Windows 10
A DVD is included with each K-1900-8-IP VoIP Phone. The DVD contains the application "K-1900-8-IP Tech Tool" used to
program the unit using a PC running Windows 2000, XP, Vista, Windows 7, Windows 8 or Windows 10 (see System
Requirements above). The PC must be connected to the same LAN as the K-1900-8-IP VoIP phone. Install the application
on your PC by placing the DVD into your PC's drive. Click "I Accept" on the bottom of the first screen, then select "Viking K-
1700-IP Tech Tool" and click the "Install" button. Follow the directions on the screen. To start the Viking K-1700-IP Tech Tool
application, click on the Viking K-1700-IP Tech Tool icon on your desk top. The Main screen will appear, allowing the user to
program any K-1900-8-IP phone connected to that LAN.
A. Manually Muting SIP/Network Failure Alarm Beeps
With the unit connected and powered (Green LED on and Yellow LED off or blinking) it will output 3 beeps every 30
seconds to indicate a SIP registration failure, failure to receive an echo reply from pinged gateway or Ethernet connection
failure. You can manually disable the beeps by clicking the "Mute Alarm Until Next Failure" button in the Viking VoIP
programming software. The LED will continue to flash allowing you to trouble shoot the failure.
100m (328 ft) maximum*
10/100 Mbps
Maximum
Optional
PoE Injector
(If VoIP PBX does
not have PoE)
PC Requirements
PC Programming
SIP VoIP PBX
or
PC with
SIP Server
Software
Optional
Switch / Hub
(Extends range of cable, keeps
1 Gbps network speed for other
equipment on network)
• Adobe Acrobat Reader 8 or higher
• K-1900-8-IP hardware
• Available LAN with PoE (class 2, <6.5 watts)
• Ethernet cable ( CAT5 min.)
• 1 MB minimum free hard drive space for installation
• 16MB of free physical RAM
(3 beeps repeated every 30 seconds)
7
Internet

Advertisement

Table of Contents
loading

This manual is also suitable for:

K-1900-8-ip-ewp

Table of Contents