Viking K-1900-8-IP Product Manual page 15

18. Off Hook Auto Dial Delay
The Off Hook Auto Dial Delay is the length of time from when the handset is taken off-hook to when the unit starts dialing
the Primary number programmed in Phone Number Database Index 0. The time is programmable from 0 to 6 seconds.
Adding Off Hook Auto Dial Delay time is useful to allow visitors time after they come off-hook to then enter the tenant's
apartment number (Speed Dial Number) or their Keyless Entry Code.
19. Off Hook Auto Dial
The Off Hook Auto Dial feature allows visitors that do not know the tenant's apartment number (Speed Dial Number) a
way of simply going off-hook with the handset (with no additional numbers entered) and the unit will automatically dial
the Primary Phone Number stored in Phone Number Database Index 0. This could route the call to the building manager,
care taker, receptionist, etc.
20. Select Time Zone
When using date and time logged events or setting the access date and times of keyless codes or proximity cards in
the Entry Code Database, you must program the unit to your time zone. Example: You are installing the K-1900-8-IP in
the Central standard time zone: Select (UTC - 06:00) CST, which is 6 hours behind Coordinated Universal Time (UTC).
Keyless Entry Code and Proximity Card logging can be set to Log Errors. With Log Errors selected, the K-1900-8-IP
will not only log all valid Keyless Entry Code and Proximity Card entries, but also log any errors, incorrect codes, or
non-valid card reads.
Keyless Entry Code and Proximity Card logging can also be set to Live Logging. With Live logging selected and the
K-1900-8-IP programming software open and connected to a unit, each Keyless Entry Code entered or Proximity Card
read will immediately open the Event Log screen and display the latest entry.
23. Relay Mode
Doorstrike Mode: When programmed for Doorstrike Mode the relay will momentarily activate for the preprogrammed
relay activation time after detecting the correct relay activation command (one or two digit touch tone) from the called
party.
Outbound Call Mode: When programmed for Outbound Call Mode the relay will activate continuously for the duration
of any outbound call from the Entry phone.
Inbound/Outbound Call Mode: When programmed for Inbound/Outbound Call Mode the relay will activate
continuously for the duration of any inbound or outbound call to or from the Entry phone. This mode is useful for turning
on IR flood lights, for VoIP phones with cameras, etc.
Doorbell Mode: When programmed for Doorbell Mode the relay will momentarily activate the relay for the
preprogrammed relay activation time on any outbound call from the Entry phone. This mode is useful for activating a
door chime, etc. When activating door chimes, a 0.5 - 1 second relay activation time is recommended.
Alarm Mode: When programmed in Alarm Mode the relay will activate continuously while the Entry phone is powered
and registered to the SIP server. In the event the unit loses power and/or SIP registration the relay will turn off, which
can be used to signal an alarm device.
Loud Ring Mode: When programmed for Loud Ring Mode the relay will continuously activate while the ringing
extension is called. This mode is useful for activating a Viking model SL-2 strobe light, etc.
Loud Ring Flash Mode: When programmed for Loud Ring Flash Mode the relay will momentarily turn on and off in
a 400ms on/off cadence while the ringing extension is called. This mode is useful for activating a Viking LPL-1 Remote
Visual Indicator, etc.
15