Viking K-1900-8-IP Product Manual page 20

Control Relay Contacts Across a Local Area Network
The RC-4A Network Enabled Relay Controller provides networked control of four relays via an easy-
to-use web interface. The same interface can be used to check the status of four contact closure
inputs. Relays can be toggled on or off, or user-programmed timed closures can be activated.
The RC-4A can be configured to work as a remote relay for Viking VoIP series entry phones,
controlling door strikes and gates when a remote relay is required for security reasons. It can also
be programmed to send an email or text message in response to a change in one or more of the
sensor inputs. Two RC-4A's can be set up so that activity on a sensor input of one unit will
automatically send a message across the network to activate one of the relays on the other unit.
Two levels of user access permit selected users to have full operational and programming rights
while others have operational control but not programming capability.
125KHz Proximity Card Reader
The model PRX-1 is a 125KHz proximity
card reader and is designed to be mounted
directly to a metal door or window frame
(mullions), making it ideal for applications
requiring
proximity card reader transmits data in 26-
Bit Wiegand format, making it compatible
with any of the Wiegand equipped Viking
entry controllers.
The PRX-1 delivers non-contact read
ranges up to 6 inches (152 mm), and
PRX-1
operates from 5 to 14 VDC. Physical size is
a compact 3.2 x 1.7 x 0.70 inches (80 x 43 x 17 mm). Mounting is
simplified with horizontal and vertical mounting slots, which allow
the reader to be conveniently adjusted and leveled. To allow both
indoor and outdoor operation the electronics are sealed in tamper
resistant epoxy potting. Concealing the mounting hardware, the
PRX-1 ships with both Black and Ash (Off-White) covers standard.
See DOD# 221 for more information.
125KHz Proximity Cards
The PRX-C and PRX-C-ISO are non-contact security cards that
can be presented to the front of a K-1770/75-IP proximity card
reader to allow entrance into a secured area. The PRX-C is a clam
shell card made made from 0.070" thick plastic to resist bending
and folding. A slot is provided at one end to allow a lanyard to be
Related Products
an access credential.
added for creating a "dog tag"
style neck strap. The PRX-C-ISO
is a thin 0.032" thick flexible "ISO"
style proximity card. Much like a
credit card, the PRX-C-ISO is
perfect for storing in your wallet.
The PRX-FOB is a proximity key
ring fob with brass eyelet
designed to attach to a key chain
or necklace. The PRX-FOB's
compact size is only 1.5" x 1.2" x
0.15" making it one of the
smallest available.
The cards and fobs are custom
pre-programmed. For more
information see DOD# 198.
For more info, see DOD# 585
Medium Range 125KHz Proximity
The
PRX-3
directly to a wall, post, single gang electrical box or use an optional
mounting kit for attaching it to a gooseneck pedestal. Mounting is
simplified with horizontal and vertical mounting slots, which allow
the reader to be conveniently adjusted and leveled. To increase
vandal resistance the chassis is a single piece design with the
mounting screws concealed behind a UV stable label.
The proximity card reader transmits data in 26-Bit Wiegand format,
making it compatible with any of the Wiegand equipped Viking entry
controllers. The PRX-3 is equipped with Enhanced Weather
Protection (EWP) for outdoor installations where the unit is
exposed to precipitation or condensation. With its sealed
connections and fully potted electronics the PRX-3 is designed to
meet an IP66 Ingress Protection Rating. For more information
see DOD# 228.
Gooseneck Pedestal Mounting Kit
PRX-3 shown with
VE-GNP pedestal,
PRX-3-MK-VEGNP
mounting kit and
K-1900-8-IP-EWP
with VE-5x10
For more info
see DOD# 229
20
Card Reader
The model PRX-3 is a high
performance medium
125KHz proximity card reader.
The PRX-3's compact size yet
long read range
inches* make it ideal for parking
control, gate access, turnstiles,
etc. It is designed to be mounted
The model PRX-3-MK-VEGNP is a mounting kit
for attaching the PRX-3 proximity card reader
and a VE-5x5, VE-6x7 or VE-5x10 (surface
mount entry phone box) to a VE-GNP
gooseneck pedestal. It includes the required
mounting hardware, has a mounting plate made
from durable 3/8 inch thick black UV stable
textured ABS plastic and a gasket for sealing
the back side of the VE surface mount box.
range
of up to 16