Viking K-1900-8-IP Product Manual page 11

2. Phone Number Database
Clicking on the "Phone Number Database" button will open a screen allowing you to program all the Tenants Name's,
Speed Dial Numbers, and Primary and Roll Over phone numbers. Tenant names are stored locally on the PC and are
not uploaded.
The Speed Dial Number is the 1 to 3 digit number visitors enter on the K-1900-8-IP's keypad for the unit to call the
tenant. 3 seconds after the 1 to 3 digit number is entered, the unit will then dial the Primary Phone Number associated
with that Speed Dial Number. If there is no answer or a busy signal is detected, the K-1900-8-IP will then dial the Roll
Over Phone Number.
The Primary Phone Number programmed in Index 0 is the number that is dialed when the "CALL" button is pressed
with no additional digits (if "Call Button Autodial" is enabled). A second Roll Over Number will be dialed when there is
no answer or a busy signal is detected. The K-1900-8-IP phone is factory set with no Primary or Roll Over numbers
programmed.
Note: Typical Apartment Applications use the tenant's 1 to 3 digit apartment number as the Speed Dial Number. After
the apartment number is entered the unit will then dial the tenant's phone number.
11