Impex APEX AX-2109.1 Owner's Manual page 17

STEP 6 (See Diagram 6 & Cable Loop Diagram)
A.) Attach one end of the 119" Butterfly Cable (#37) to the hook on the Right Butterfly (#6).
B.) Draw the Cable to the right Swivel Pulley Bracket (#21).
C.) Attach a Pulley to the bracket. Secure it with one M10 x 2" Allen Bolt (#87), two Cable
Retainers (#89), two Ø ¾" Washers (#83), and one M10 Aircraft Nut (#85).
D.) Draw the Cable around the Pulley then downward. Attach the Cable to a Crossed Double
Floating Pulley Bracket (#20). Attach a Pulley to the bracket. Secure it with one M10 x 2" Allen
Bolt (#87), two Cable Retainers (#89), two Ø ¾" Washers (#83), and one M10 Aircraft Nut
(#85). Leave the Bracket hanging for now.
E.) Pull the Cable around the Pulley then upward to the left Swivel Pulley Bracket. Repeat
Procedure C above to install a Pulley.
F.) Draw the Cable to the left Butterfly. Attach the end to the hook on the Left Butterfly.
16