Table of Contents
Advertisement
WARNING
Potential risk of fire, electric shock, and personal
injury. Take precautions to reduce such risks.
CAUTION
Label all wires prior to disconnection when servicing
controls. Wiring errors can cause improper and
dangerous operation. Verify proper operation after
servicing.
R. BRN. THERM (4)
L. BRN. THERM (3)
Page 36
WIRING
Figure 68
TRANSFORMER
WHITE
YELLOW
PURPLE
PURPLE
YELLOW
P2
WHITE
BLACK
T2
RED
T1
BLACK
P1
WHITE
Figure 69
This fireplace is equipped with a three-prong [grounding]
plug for your protection against shock hazard and should be
plugged directly into a properly grounded three-prong recep-
tacle. Do not cut or remove the grounding prong from this
plug. For an ungrounded receptacle, an adapter, which has two
prongs and a wire for grounding, can be purchased.
Proper line voltage polarity must be maintained in order for the
control system to operate correctly. Verify the incoming neutral line
is connected to the white wire and the incoming "hot" line is con-
nected to the black wire. The fireplace will not operate properly
unless the polarity and ground are correct.
BLUE
INDICATOR
SWITCH
+ -
14 WAY RIBBON TO
CONTROL MODULE
RECEIVER
30259-0-0212
Advertisement
Table of Contents
