4.1.5.6 EDC Mode
■ Method to enter
1. Power – On the printer, and wait until the "READY" message appearing on LCD Panel.
2. Push button like next time "Menu → Stop → Left arrow → Back → OK → Right arrow → Menu"
Note
- When pressing the button, you have to finish whole sequence as soon as possible. (within 3 seconds)
3. "COMPONEMT TEST Press Menu Key"
①
③
⑤ ⑥
⑦
Keys
Key
Menu
Left Arrow
OK
Right arrow
Back
Stop
EDC Menu
0. Cover Status
Item
Top Cover
Tray2 Door
Service Manual
Alignment & Troubleshooting
④
Move to the top menu
Move test item
Start testing or select Sub-item
Move test item
Move upper menu
Stop testing
When a top cover opened, Open message display LCD. If the top cover closed,
Closed message display LCD
When a tray2 door opened, Open message display LCD. If the tray2 door closed,
Closed message display LCD
Description
Description
4-42
②
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics