Samsung CLX-6210FX Service Manual page 124

Message
Reverse Jam 0 Paper has jammed in the paper fuser area
Check Inside and In the cover of reverse unit area.
Reverse Jam 1 Paper has jammed In the cover of reverse
Check Inside unit area or in the rear cover.
Scanner locked The scanner module is locked
Self Diagnostics The engine in your machine is checking
Temperature problems detected.
Self Diagnostics The LSU (Laser Scanning Unit) in your
LSU machine is checking problems detected.
Send Error There is a problem in SMTP authentication.
(AUTH)
Send Error There is a problem in DNS.
(DNS)
Send Error There is a problem in POP3.
(POP3)
Send Error There is a problem in SMTP.
(SMTP)
Send Error There is a problem on the network interface
(Wrong Config) card.
Toner Empty The color toner cartridge has run out.
The machine stops printing.
Press OK to toggle the message to Stop,
Continueor Black Only.
Toner Exhausted The lifespan of the color toner cartridge which
the arrow indicates is reached.
Toner Low The corresponding color toner cartridge is
almost empty.
Tray 2
Paper has jammed In the paper feed area.
Paper jam 0
Service Manual
Alignment & Troubleshooting
Meaning
Stop
If the black toner cartridge is empty,
Black Only messagedoes not
appear.
Clear the jam.
Clear the jam.
Unlock the scanner and press Stop/Clear.
Wait a few minutes.
Wait a few minutes.
Configure the authentication setting.
Configure the DNS setting.
Configure the POP3 setting.
Change to the available server.
Configure your network interface card
correctly.
You can select the option among Stop,
ontinue or Black Only with the left/right arrow.
If you select Stop by pressing OK on the
control panel, the machine stops printing.
If you select Continue, the machine keeps
printing, but the quality cannot be guaranteed.
If you select Black Only, the machine prints
the data in black. In this case, the mono
printing feature is preset in the printer
properties.
When you copy, the Black Start button will
be activated only with this condition.
If you do not select any, the machine will work
as Stop is selected.
Replace the color toner cartridge with a new
one.
This message appears when the toner is
completely empty, and your machine stops
printing. Replace the corresponding toner
cartridge with a Samsung-genuine cartridge.
Take out the toner cartridge and thoroughly
shake it. By doing this, you can temporarily
reestablish printing operations.
Clear the jam.
4-53
Suggested Solution
Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics