Samsung CLX-6210FX Service Manual page 107

4.1.5.5 F/W Upgrade
• USB and Network port are used to F/W upgrade.
• Network applications (SWAS, SWS) can be used for network port upgrade.
• Notice : In special mode upgrade, kernel waste header information for CLX-62x0/CLX-6240.
You have to check F/W ROM file with MFP set
(This mode is ONLY service mode, not user mode)
1) Using button
• F/W Upgrade using USB Port
- Make sure connecting Printer to the computer
with a USB cable
- Upgrade in Ready mode
Send ROM image file via USB cable in
Ready mode
- Upgrade in Special mode
Power ON with pressing 'STOP key' two
times
Change LCD message 'Wait Image'
Send ROM image file via USB cable
Service Manual
Alignment & Troubleshooting
4-36
Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics