4.1.4.4 In the paper exit area
If paper is jammed in the paper exit area, follow the next steps to release the jammed paper.
1. If a long portion of the paper is visible, pull it
straight out. Open and close the front cover
firmly. The machine will resume printing.
If you cannot find the jammed paper, or if there
is any resistance removing the paper, stop
pulling and go to step 2.
2. Open the scan unit.
Service Manual
Alignment & Troubleshooting
3. Open the cover of reverse unit using the handle
on it and carefully take the jammed paper out of
the machine.
the jammed paper out of the machine.
If there is any resistance removing the paper or
difficulty picking up jammed paper, stop pulling
and turn the release knob to the direction as
shown to remove themisfed paper.
You can turn the exit roller easy by Indicated
green roller.
4. Close the cover of reverse unit.
4-12
green roller
Samsung Electronics