Specifications - NAD T 533 Owner's Manual

GENERAL
Power requirements
Power consumption
Dimensions (approx.)
Weight (approx.)
Operating temperature
Operating humidity
SYSTEM
Signal system
Frequency response
Signal-to-noise ratio
Harmonic distortion
Dynamic range
OUTPUTS
S-VIDEO OUT
COMPONENT VIDEO OUT
Audio output (digital audio)
Audio output (optical audio)
Audio output (analog audio)
Audio output (analog audio)
INPUTS
+ 12V Trigger input
ACCESSORIES
Remote control
Design and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. Dolby, MLP Lossless and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.
"DTS' and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
AC 110-240V, 50/60 Hz
14W
435 X 55 X 241 mm (w x h x d)
2.4 kg
5˚C to 35˚C (41˚F to 95˚F)
5 % to 90 %
Laser Semiconductor laser, wavelength 650 nm
NTSC
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
More than 100dB (ANALOG OUT connectors only)
Less than 0.008%
More than 100 dB (DVD)
More than 95 dB (CD)
VIDEO OUT 1 Vp-p 75 ohms, sync negative, RCA jack x 1
(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 ohms
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2
0.5 V (p-p), 75 ohms, RCA jack x 1
5 V (p-p), 75 ohms, Optical connector x 1
2.0 Vrms (1 KHz, 0 dB), 600 ohms, RCA jack (L, R) x 1
2.0 Vrms (1 KHz, 0 dB), 600 ohms, RCA jack (LF, RF, C, RR, LR, SW) x 6
center pin +12V at 50 mA, subminiature banana jack x 1
Video cable 1
Audio cable 1
1
Batteries 2
Reference

SPECIFICATIONS

29