NAD T 533 Owner's Manual page 16

Preparation
BEFORE OPERATION
COUNTRY CODE
DVD-V
Enter the code of a country/area whose standards were used to rate the
DVD video disc, referring to the list (See "Country Code List", page 28.)
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
1 Select Country Code using the
2 While Country Code is selected, press
3 Follow step number "3" of "Rating" on left side of this page.
4 Select the first character using the
5 Shift the cursor using button and select the second character
using buttons.
6 Press ENTER to confirm your country code selection, then press
SETUP to exit the menu.
16
Code Set
U S
buttons on the setup menu.
.
buttons.
NOTE
Confirmation of the 4-digit password is necessary when the code is
changed (see "Changing the 4-digit code" below).
CHANGING THE 4-DIGIT CODE
1 Follow Steps 1-2 as shown above to the left (Rating).
2 Enter the old code, and then press ENTER.
3 Select Change using buttons then press ENTER.
4 Enter the new 4-digit code, and then press ENTER.
5 Enter exactly the same code a second time and verify by pressing
ENTER.
6 Press SETUP to exit the menu.
IF YOU FORGET YOUR 4-DIGIT CODE
If you forget your password, to clear the current password, follow the
procedure below:
1 Press SETUP to display the setup menu.
2 Use the Number buttons to enter the 6-digit number "210499". The
4-digit password is cleared. "P CLr" appears on the T 533's front
display for a moment.
3 Enter a new code as shown under "Rating"