Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of...
HDCD® (High Definition Compatible Digital®) is a recording system that has improved audio CD sound in dynamic range, sound field reproducibility and vocal acoustics. This DVD player is equipped with an HDCD decoder. The HDCD indicator illuminates when playing an HDCD-encoded audio CD. ®...
To obtain a clear picture The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn down, the picture quality will be poor.
STANDBY/ON indicator Lights red when the player is in Standby mode (off). RANDOM Plays tracks in random order. Remote Sensor Point the DVD Player remote control here. Insert a disc here. POWER Switches the player ON and OFF. ANGLE Lights when multi angles A light will appear if a disc is in the disc tray.
Remote Control POWER Switches DVD Player ON and OFF. SETUP • Accesses or removes setup menu. REPEAT • Repeat chapter, track, title, all. A-B • Repeat sequence. RANDOM • Plays tracks in random order. TITLE Displays the discs Title menu, if available.
Rear Panel depending on how you connected the DVD Player to the TV. By connecting this DVD player to another NAD audio component or system controller equipped with a 12V trigger output, you can remotely operate the T572 power ON/OFF.
DVD Player to the audio left/right in jacks on the TV (A) using the supplied audio cables. SCART connection Connect the TO TV scart jack on the DVD Player to the corresponding in jacks on the TV using the scart cable (T).
Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround Connect the Left and Right AUDIO OUT jacks on the DVD Player to the audio left and right in jacks on your amplifier, receiver or stereo system, using the supplied audio cables (A).
Before Operation General Explanation This manual gives basic instructions for operating the DVD Player. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indi- cating that the operation is not permitted by the DVD Player or is not available on the disc.
Before Operation (Continued) Initial Settings You can install your own Personal Preferences. Initial Settings General Operation Press SETUP. The setup menu appears. Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan Digital Audio Output 5.1 Speaker Setup Others Press 3 3 /4 4 to select the desired item.
Set the player’s Digital Audio Output according to the type of audio system you use. DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM” if you connect the DVD Player’s DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equip- ment with a Dolby Digital decoder).
Before Operation (Continued) Parental Control Rating Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs.
Turn on the TV and select the video input source corresponding to the DVD player. Audio system: Turn on the audio system and select the input source connected to the DVD player. Press OPEN/CLOSE to open the disc tray. Load your disc in the tray, with the label facing When a double-sided DVD is inserted, make sure the side you want to play is facing down.
Operation with DVD, Video CD and Audio CD (Continued) General Features Note Unless stated otherwise, all operations described use the remote control. Some features may also be available from the Setup menu. Moving to another TITLE When a disc has more than one title, you can select to another title as follows: Press DISPLAY when playback is stopped.
Operation with DVD, Video CD and Audio CD (Continued) General Features (cont’d) Repeat VCD2.0 VCD1.1 DISC CHAPT TITLE TRACK DVD Video Discs - Repeat Chapter/Title/Off 1 To repeat the chapter currently playing, press REPEAT. The Repeat Chapter icon appears on the TV screen. 2 To repeat the title currently playing, press REPEAT a second time.
Operation with DVD, Video CD and Audio CD (Continued) General Features (cont’d) Marker Search VCD2.0 MARKER SEARCH You can start playback from a memorized point. Up to nine points can be memorized. To enter a mark, follow these steps. 1 During disc playback, press MARKER at the location you want to memorize.
Programmed Playback with Video CD and Audio CD Programmed Playback with Video CD and Audio CD Note On a Video CD with PBC, you must set PBC to Off on the setup menu to use the Program function. See page 13. Insert a Video CD or Audio CD and close the tray.
MP3 files). That require certain pre-existing conditions (see above) to insure compatible playback. Customers should also note that permission is required in order to download MP3 files and music from the Internet. NAD cannot grant such permission. Permission should always be sought from the copyright owner.
Programmed Playback with MP3 Disc Programmed Playback with MP3 Disc Program allows you to store your favorite tracks for a particular disc in the player memory. Program can contain 60 tracks. Insert the disc and close the tray. The menu is displayed on the TV screen. Press PROGRAM during playback or in the stop mode to enter the Program Edit mode.
HDCD Indicator lights. No user intervention is required. To enjoy the benefits of HDCD, your DVD Player must be connected to your A/V receiver via the Analog Audio Outputs. However, if your A/V receiver or surround...
The disc is dirty. The Rating level is set. The remote control The remote control is not pointed at the remote sensor of the DVD player. does not work properly. The remote control is too far from the DVD player.
Language Code List Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 12). Code Language 6565 Afar 6566 Abkhazian 6570 Afrikaans 6577 Ameharic 6582 Arabic 6583 Assamese 6588 Aymara 6590 Azerbaijani 6665 Bashkir 6669...
Country Code List Enter the appropriate code number for the initial setting “Country Code” (See page 14). Code Country Code Country Andorra United Arab Emirates Afghanistan Antigua and Barbuda Anguilla Albania Armenia Netherlands Antilles Angola Antarctica Argentina American Samoa Austria Australia Aruba Azerbaidjan...
Specifications General Power requirements Power consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity System Laser Signal system Frequency response Signal-to-noise ratio Harmonic distortion Dynamic range Outputs VIDEO OUT S-VIDEO OUT Audio output (digital audio) Audio output (optical audio) Audio output (analog audio) Accessory Video cable .
Need help?
Do you have a question about the T 572 and is the answer not in the manual?
Questions and answers