Polaris RANGER Diesel 2013 Owner's Manual For Maintenance And Safety page 33

Instrument Cluster
Rider Information Center
Diagnostic Mode
Programmable service interval
To enable or disable the service interval:
1. Enter the diagnostic mode.
2. Toggle to the service interval screen.
3. Press and hold the MODE button for about 7 seconds, until either ON or OFF appears in
the Rider Information Center, depending on your preference.
To reset the service interval:
1. Enter the diagnostic mode.
2. Toggle to the service interval screen.
3. Press and hold the MODE button for 2-3 seconds, until the wrench icon flashes. Release
the button.
4. Press and release the MODE button once to advance the setting by one hour. Press and
hold the MODE button to advance the hours quickly.
5. If you scroll past the intended number, press and hold the button until the hours cycle
back to zero.
6. When the desired setting is displayed, wait until the wrench icon stops flashing. The new
service interval is now programmed.
Miles/Kilometers toggle
The display in the tripmeter and odometer can be changed to display either standard or met-
ric units of measurement.
1. Enter the diagnostic mode.
2. Toggle to the screen that displays either kilometers (KM) or miles (MP).
3. Press and hold the MODE button until the letters flash, then press and release the button
once. When the display stops flashing, the mode has been set.
FEATURES AND CONTROLS
29