Advertisement
20
Electrolux Pump Espresso EES250 Operating Insruction
■ Back to factory preset:
Keep pressing single-cup and double-cup buttons at the same time for at
least 3 seconds till the appliance produces "beep- beep-beep". Then the
coffee temperature indicator will flash for 3 times and then go to the status
of always lighting on, which means the setting has gone back to the original.
● Sleeping Mode and Power off Function
Leaving the appliance for 30 minutes without use, it will automatically enter
sleeping mode. Coffee temperature indicator keeps flashing. After 1.5 hours, the
machine will be turned off automatically.
● Trouble Shooting
■ No Water Alarm
When water in the tank is below the minimun or the tank is improperly fitted, both
indicators will be flashing (0.5 second ON/0.5 second OFF) after continuous
beep-beep-beep warning. To release the warning: Turn off the machine first. Re-
fit the tank or add water into the water tank; press either single-cup, double-cup
or manual button. Then the pump will work for 5 seconds. If water detected, the
machine will be back to stand-by position.
■ Position Mistake of the Knob Alarm
Both indicators will be flashing (0.5 second ON/0.5 second OFF) after continuous
beep-beep warning. To release the alarm: turn the selector back to "off".
Advertisement
