Gigabyte GA-5SMM User Manual page 68

•
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power on the
computer. If it set to Enable, BIOS will skip some check items during POST.
The default value is Enabled.
Enabled Enabled quick POST.
Disabled Normal POST.
•
Boot From LAN First
The default value is Enabled.
Enabled Enabled Boot From LAN First
Disabled Disabled Boot From LAN First
Auto Boot From LAN First set to Auto
•
Boot Sequence
This category determines which drive computer searches first for the disk
operating system (i.e., DOS). Default value is A, C, SCSI.
A,C,SCSI System will first search for floppy disk drive then hard
disk (C) drive and SCSI drive.
C,A,SCSI System will first search for hard disk (C) drive then
floppy disk drive and SCSI drive.
C,CDROM,A System will first search for hard disk (C) drive then
CDROM drive and floppy disk drive.
A,CDROM,C System will first search for floppy disk drive then
CDROM drive and hard disk (C) drive.
CDROM,A,C System will first search for CDROM drive then floppy
disk drive and hard disk (C) drive.
CDROM,C,A System will first search for CDROM drive then hard disk
(C) drive and floppy disk drive.
D,A,SCSI System will first search for hard disk (D) drive then
floppy disk drive and SCSI drive.
E,A,SCSI System will first search for hard disk (E) drive then
floppy disk drive and SCSI drive.
F,A,SCSI System will first search for hard disk (F) drive then
floppy disk drive and SCSI drive.
4-10
BIOS Configuration