Gigabyte GA-5SMM User Manual page 64

•
Primary HDDs / Secondary HDDs
The category identify the types of hard disk from drive C to drive F
4 devices that has been installed in the computer.
There are three options for definable type; User, Auto and None .
Type User is user-definable; and type Auto means automatically detecting HDD's
type and None means No IDE HDD installed.
If you select Type User, related information is asked to be entered to the following
items.
Enter the information directly from the keyboard and press <Enter>.
Those information should be provided in the documentation from your hard disk
vendor or the system manufacturer.
CYLS. number of cylinders
HEADS number of heads
PRECOMP write precomp
LANDZONE landing zone
SECTORS number of sectors
If a hard disk has not been installed select NONE and press <Enter>.
•
Drive A type / Drive B type
The category identify the types of floppy disk drive A or drive B that has been
installed in the computer.
None No floppy drive installed
360K, 5.25 in. 5-1/4 inch PC-type standard drive; 360 kilobyte
capacity.
1.2M, 5.25 in. 5-1/4 inch AT-type high-density drive; 1.2 megabyte
capacity (3-1/2 inch when 3 Mode is Enabled).
720K, 3.5 in. 3-1/2 inch double-sided drive; 720 kilobyte capacity
1.44M, 3.5 in. 3-1/2 inch double-sided drive; 1.44 megabyte capacity.
2.88M, 3.5 in. 3-1/2 inch double-sided drive; 2.88 megabyte capacity.
•
Floppy 3 Mode Support (for Japan Area)
4-6
BIOS Configuration