Viking E-10-IP Product Manual page 9

Hide thumbs Also See for E-10-IP:
Table of Contents

Advertisement

E. Lap Counter (#16)
With the lap counter disabled (factory setting), if the E-10/20/30-IP phone is programmed
to dial the next number on ring-no-answer and/or busy signal (see section F and G below),
the E-10/20/30-IP phone will continuously call its programmed phone numbers forever
until the call is answered.
The lap counter is a programmable counter that determines how many times the E-
10/20/30-IP phone will cycle through its list of up to 5 emergency numbers (or up to 5
"Info" phone numbers), before it stops the dialing process and hangs up. When all of the
programmed phone numbers have been dialed, the lap counter is incremented and the
dialing process repeats. When the lap counter has been met, the dialing process stops
and the E-10/20/30-IP phone hangs up.
* Note: This feature is disabled in the factory default setting.
F. Dial Next Number on Ring No Answer (#17)
If enabled and a ring-no-answer is detected, the E-10/20/30-IP phone will dial the next
programmed speed dial number, and continue to cycle through the emergency numbers
until a call is completed.
* Note: Factory set to redial if not answered after 7 rings.
G. Dial Next Number on Busy (#18)
If enabled and a busy is detected, the E-10/20/30-IP phone will dial the next pro-
grammed speed dial number, and continue to cycle through the numbers until a
call is completed.
* Notes: This feature is enabled in the factory default setting. If the busy signal is interrupted with a promotional
message, contact your central office to have it removed.
H. Identification Number (#20)
The Touch Tone I.D. number (up to 6 digits) is used by emergency personnel to identify the location of the caller
and is given out when the receiving party presses a Touch Tone Q. The security office can display the number
using a Touch Tone decoder. To program the I.D. number, enter the desired number followed by #20. Example:
To store 333 as the I.D. number, enter: 3 3 3 # 2 0
Touch
Lap
Tone
Counter
0
Disabled*
1
1 time
2
2 time
3
3 time
4
4 time
5
5 time
6
6 time
7
7 time
8
8 time
9
9 time
Touch
Ring No
Tone
Answer
0
Disabled
1
Disabled
2
2 rings
3
3 rings
4
4 rings
5
5 rings
6
6 rings
7
7 rings*
8
8 rings
9
9 rings
Touch
Dial on Busy
Tone
1
Disabled
2
Enabled*
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-20-ipE-30-ip

Table of Contents