Rubine RCF-SP900-5BL-GC Instruction Manual

Rubine RCF-SP900-5BL-GC Instruction Manual

56" remote control ceiling fan with light

Advertisement

5 6"
REMOTE CONTROL CEILING FAN WITH LIGHT
In s t r u c t i o n M an u al
SAFETY GUIDELINES AND INSTALLATION PROCEDURES
RCF-SP900-5BL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RCF-SP900-5BL-GC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Rubine RCF-SP900-5BL-GC

  • Page 1 5 6" REMOTE CONTROL CEILING FAN WITH LIGHT In s t r u c t i o n M an u al SAFETY GUIDELINES AND INSTALLATION PROCEDURES RCF-SP900-5BL...
  • Page 2: What You Have

    WHAT YOU HAVE Please checkout following parts after opening the box: QUANTITY PARTS QUANTITY PARTS RF RECEIVER DOWNROD GLASS SHADE .TOP CANOPY 3. COUPLING COVER FAN MOTOR & LED LAMP (7W) 5. BLADES DIGITAL TOUCH SCREEN REMOTE QUANTITY SCREW PACKAGE (COMES WITH 3V BATT X2) REMOTE HOLDER WITH 2 .BLADE ATTACHMENT SCREWS...
  • Page 3 WARNING A). TO ENSURE YOUR PERSONAL SAFETY, PLEASE READ THROUGH THE INSTRUCTION MANUAL BEFORE USE 1 ) Do not bend the blade holders during installation, blades balancing or fan cleaning. 2 ) To prevent accidents, power switch must be OFF before ceiling fan installation. 3 ) Ceiling fan installation and electrical wiring must be done by qualified technician in accordance with all applicable codes and air conditioning engineers (ASHRAE) or the local qualified authorities.
  • Page 4: Installation Procedures

    INSTALLATION PROCEDURES Before ceiling fan installation,please go through the procedures in detail with picture diagram as reference. DIAGRAM 1 STEP 1 ( See Diagram 1 ) Screw Remove screws on plastic blocks. Put aside these screws for fan blade installation in Step 7.
  • Page 5: Supply Circuit

    STEP 5 (See Diagram 5) Connect the Motor Wiring to Receiver first! Connect wiring as below:- FROM Brown Wire “L” Terminal Block (marked Receiver (TO MOTOR L) Blue W “N” Terminal Block (marked Receiver (TO MOTOR N) (Orange Wire) Receiver “...
  • Page 6 DIAGRAM 6 STEP 6 ( See Diagram 6 ) Fit the connected receiver into top Receiver canopy. Then, tighten the screw on downrod. op Canopy Screw Downrod DIAGRAM 7 STEP 7 ( See Diagram 7 ) Tighten the fan blade onto the motor housing by using the screws which you removed from the plastic plate in Step 1.Repeat proces for the other...
  • Page 7 WARNING! FASTEN THE SAFETY CABLE TO THE MOUNTED J HOOK FOR SAFETY PURPOSES. Page 6...
  • Page 8: Safety Tips

    SAFETY TIPS Please ensure the distance between fan blade and ground must be at least 2.5 meter and above. MIN 2.5m FLOOR Page 7...

Table of Contents