Rubine RCF-LE800-5BL Instruction Manual

Rubine RCF-LE800-5BL Instruction Manual

56" remote control ceiling fan with light

Advertisement

5 6"
REMOTE CONTROL CEILING FAN WITH LIGHT
Instruction Manual
SAFETY GUIDELINES AND INSTALLATION PROCEDURES
RCF-LE800-5BL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RCF-LE800-5BL and is the answer not in the manual?

Questions and answers

Summary of Contents for Rubine RCF-LE800-5BL

  • Page 1 5 6" REMOTE CONTROL CEILING FAN WITH LIGHT Instruction Manual SAFETY GUIDELINES AND INSTALLATION PROCEDURES RCF-LE800-5BL...
  • Page 2: What You Have

    WHAT YOU HAVE Please checkout following parts after opening the box: QUANTITY QUANTITY PARTS PARTS DIGITAL TOUCH SCREEN REMOTE 1.DOWNROD (COMES WITH 3V BATT X2) 2.TOP CANOPY 10A. REMOTE HOLDER 3. COUPLING COVER WITH 2 MOUNTING SCREWS FAN HOUSING & MOTOR 11.
  • Page 3 WARNING A). TO ENSURE YOUR PERSONAL SAFETY, PLEASE READ THROUGH THE INSTRUCTION MANUAL BEFORE USE 1 ) Do not bend the blade holders during installation, blades balancing or fan cleaning. 2 ) To prevent accidents, power switch must be OFF before ceiling fan installation. 3 ) Ceiling fan installation and electrical wiring must be done by qualified technician in accordance with all applicable codes and air conditioning engineers (ASHRAE) or the local qualified authorities.
  • Page 4: Installation Procedures

    INSTALLATION PROCEDURES Before ceiling fan installation,please go through the procedures in detail with picture diagram as reference. STEP 1 (See Diagram 1) DIAGRAM 1 1 ) Remove 1st hex-head screw along Fixings with the fixings (pin, metal nut, lock Metal Nut Lock Washer washer and metal washer) from the Metal Washer...
  • Page 5: Supply Circuit

    STEP 4 (See Diagram 4) Connect the Motor Wiring to Receiver first! Connect wiring as below:- FROM Brown Wire “L” Receiver Terminal Block (marked (TO MOTOR L) Blue W “N” Receiver Terminal Block (marked (TO MOTOR N) (Orange Wire) Receiver “...
  • Page 6 STEP 6 (See Diagram 6) DIAGRAM 6 1 ) Screw the blade holder onto the fan Blade holder blade and decorative cover. Fan Blade 2 ) Repeat same step on all the remaining fan blades. Decorative Cover STEP 7 (See Diagram 7) DIAGRAM 7 1 ) Remove all the plastic blocks and 10 Plastic Block...
  • Page 7 WARNING! FASTEN THE SAFETY CABLE TO THE MOUNTED J HOOK FOR SAFETY PURPOSES. Page 6...
  • Page 8: Safety Tips

    SAFETY TIPS Please ensure the distance between fan blade and ground must be at least 2.5 meter and above. MIN 2.5m FLOOR Page 7...

Table of Contents