Adjustment
13
Neutral position of the top feed dog
.05.12
13 - 14
Requirement
When the stitch length is set at "0" and with the adjustment gauge 4 fitted, there should
be no feeding motion of the top feed dog.
1
4
54-033
Fig. 13 - 13
The stitch length limitation (screw 1 in Chapter 13.05.04 Neutral position of
the bottom feed dog) must be deactivated.
Set stitch length at "0".
While continuously turning the balance wheel, turn crank 1 (screw 2) so that lever 3 does
not move.
2
3