Programmed Sewing (Program Numbers 2 - 200) - Pfaff 3822-1/32 Instruction Manual

Sewing
10 Programmed sewing (program numbers 2 – 200)
.02.03
Using the program numbers 2 – 200, seam programs programmed beforehand can be
selected.
2 2 0 0
to
Enter
Displays in the status bar:
Program number
The number of the selected seam program appears next to this symbol.
Seam areas left/right
The number of the seam areas for left and right parts is shown next to this symbol.
Set length
The set length of the current seam section is shown next to this symbol. If no value is given,
with the use of the knee switch the program moves on to the next seam section.
Text displays:
Beginning of seam
Seam area sewn
4
Current seam area (with seam area number) Current seam area Current seam area
Current seam area Current seam area
End of seam
10 - 4
Select SEWING mode.
Select program selection function.
Enter desired program number from 2 - 200
Confirm input with Enter.
2 4 | 5
1 2 3 4 5 6 7
The programmed amounts of fullness (seam areas) are processed consecutively
dependent on the programmed number of stitches.
In seam areas, which were programmed without details of the number of stitches
(number of stitches = 0), switch to the next area using the right knee switch.
Display presentation is not true to scale.
2 - 200. 2 - 200 2 - 200 2 - 200
Enter
8 9 0
Esc
Clear