13
Cutting angle of the back knife in relation to the hook knife
.08.07
Requirement
The hook knife 1 should be at a 0.05 – 0.1 mm slant to the back knife 2.
Fig. 13 - 58
Switch the machine on and let it move into position.
Switch on the edge trimming and feathered trimming device.
Slide hook knife 1 into cutting position by hand.
By turning the balance wheel, bring back knife 2 into cutting position.
Adjust hook knife 1 (screws 3) according to the requirement.
1
Adjustment
1
0.05 - 0.1 mm
2
49-46
3
13 - 59