Dual Stage Blender; Care & Maintenance - Ninja Ultima BL810 series Owner's Manual

Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base
is unplugged from the power source before
inserting or removing any attachment and
before cleaning.
CAUTION: DO NOT immerse the motor base
into water or any other liquid.
1 Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and
wipe dry.
3 Place the pitcher and single serve cup in the
dishwasher. Place the lids and attachments on
the top rack. Use caution when handling
the blade assemblies as the blades are
very sharp. Always hold the top blades
from the shaft.
NOTE: You may also wash the containers by
filling ¾ of the container with warm water
and a drop of dish washing detergent, placing
the lid or single serve blade assembly on and
pressing the pulse button a few times. Once
clean, remove the container from the motor
base. Rinse the pitcher, single serve cup and
lids under running water. Allow all the parts
to dry before storing.
HOW TO STORE
1 Store the Ninja Ultima
upright with the pitcher on the motor base,
top blades inside the pitcher and lid on the
pitcher.
RESETTING THE MOTOR THERMOSTAT
The Ninja Ultima
™
features a unique safety system which
prevents damage to the unit's motor and
drive system should you inadvertently
overload your appliance. If the appliance is
being overloaded, the motor will stop and
the power indicator light will flash. To reset
the appliance, follow the resetting procedure
below:
1 Unplug the appliance from the electrical
outlet.
2 If using the top blades, carefully remove them
by the shaft, ensuring that no food is jamming
the top or bottom cutting blades.
CAUTION: The blades are extremely sharp
- handle with care! Always hold the top
blades from the shaft.
3 Allow the appliance to cool for approximately
15 minutes.
4 Re-install the container onto the base,
carefully re-insert the top blades (if using) and
re-plug the appliance into the electrical outlet.
NOTE: Ensure that the top blades are seated
properly by standing the blades upright in the
pitcher. If the top blade is not seated properly,
carefully check the underside of the top blade
assembly to ensure there's no food in the way.
Rinse if necessary. Do not operate if the top
blades are not upright at any time.
5 Proceed to use the appliance as before,
making sure not to exceed the recommended
maximum capacities.
www.sharkninjamanuals.com

Dual Stage Blender

™
Dual Stage Blender
12