Table of Contents
Advertisement
Assembly and Use for the 2.1 L Pitcher - cont.
WARNING: Never leave the appliance unattended while in use.
USE
Fig. 6
7 Plug the motor base in for use.
8 Turn the Variable Speed Dial to speed 1.
(Fig. 6) The power indicator light ( ) will now
turn on.
To start the blender, press the "Start/Stop/
Pulse" toggle up to start processing. Slowly
increase to desired speed.
NOTE: As a safety feature, the power
indicator light ( ) will flash and the
motor will not work if the pitcher and lid
are not installed correctly.
NOTE: If you need to Pulse ingredients press
down on the toggle in short intervals.
9 When you have reached your desired
consistency, reduce speed slowly and stop the
unit by pressing up on the Start/Stop/Pulse
toggle. (Fig. 7)
10 Use the convenient pour spout when serving
smoothies, juices and other beverages you
have created! Push the pour spout back as
far as it will go before pouring. For thicker
consistencies, remove the lid and the top
blades carefully (by the shaft), then empty the
contents from the pitcher.
11 To remove the lid, press the release button on
the lid, pull the lid handle up to a 90° angle
and lift the lid off. Holding the pitcher with
one hand while removing the lid with the
other will provide the best leverage. Turn the
pitcher counter clockwise and then lift off the
base. Do not pour out ingredients without
first carefully removing the top blades.
(Fig. 8)
9
TOLL FREE:
REMOVAL
Fig. 7
1-877-646-5288
Fig. 8
CAUTION: Never insert your hands in the
pitcher as the blades are sharp. Always use a
spatula to dislodge food that has stuck to the
sides of the pitcher. Unplug the unit before
attempting to dislodge anything.
12 Make sure that the unit is unplugged when
not in use.
TIPS:
• Use low speed settings (1-3) when blending
drinks and other blended items.
• Use medium speed settings (4-6) when
frozen blending, ice crushing or grinding dry
ingredients.
• Use high speed settings (7-10) when
creating purees such as sauces, dips and
restaurant quality glazes. Top blades are
needed to power through tough ingredients
like ice, solid fruits and vegetables. If silky
smooth results are desired, push down on
the power toggle to turn off the power,
carefully remove the top blades, replace the
lid and continue processing.
• For softer ingredients, the bottom fixed
blades are enough to fully process in one
step.
Advertisement
Table of Contents
