SoftBank 912SH User Manual page 41

AC Charger
Arrows Up
Use specified AC Charger only.
1
Open Port Cover to connect Charger
^ Use slot to gently open Port Cover
as shown and rotate it.
^ Insert connector until it clicks.
2
Plug Charger into AC outlet
^ Small Light illuminates red while
charging (P.1-11); may take up to
approximately 150 minutes.
^ When charging completes Small Light goes out.
^ Extend Charger blades. (Fold back when
not in use.)
Port Cover
Release Tabs
External Device Port
1
Charger Connector
Slot
AC 100V Outlet
Small Light
Blades
AC Charger
3
3
After Charging
Unplug Charger, then disconnect handset
^ Squeeze release tabs to remove connector.
^ Replace Port Cover to protect External Device Port.
I ^ Do not pull, bend or twist AC Charger cord.
Note
^ Pull AC Charger straight out to unplug it.
^ AC Charger is compatible with household currents
between AC 100V and 240V.
2
1
1-13