SoftBank 912SH User Manual page 198

3Saving Portraits
Save up to five portraits per user. Change location, face
angle, accessory, brightness, etc. for each shot.
Follow these steps after Step 8 on P.10-20.
1 Select Face Image: and press b
2 Select from Image 1 to Image 5 and press N l
3
To overwrite saved portrait, choose Yes
3
To delete portraits, select one
A Press b
Yes
B Deleting all portraits cancels Face Recognition.
3 Frame your face on Display and press b
^ Stay still until shooting is completed.
^ If Cannot Register. Please change the shooting condition.
appears, start over from Step 2.
4 Press N i
Portrait is saved.
5 Choose Yes and press b
Face Recognition is activated.
^ To save more, repeat Steps 2 - 4.
^ To save user information, press i then M q.
A Press b
A Press M . A
Choose
Precautions for Portrait Capture
3 Look straight into lens and frame whole face with no
expression; adjust face size (may not be saved if too small).
Stay still until shooting is completed.
3 Do not wear a mask when capturing portraits, even for use
with Low(Mask) (P.10-22 "Security Level").
I
^ Saving multiple portraits increases recognition
Tip
accuracy. However, security will be compromised.
^ A person's portraits can be saved to multiple users; this
may increase recognition accuracy.
Activating & Canceling
^ Save a user beforehand.
^ Face Recognition is Off by default.
ISettings A
Phone Settings (F)
Main Menu
A
Recognition Switch On/Off
1 Choose On or Off and press b
2 Enter Handset Code and press b
10
A A
Locks Face
10-21