SoftBank 912SH User Manual page 333

4 Press and hold l to speak
Do so while initiating Circle Talk to be the first speaker.
^ Speaker's voice is heard by all other participants.
^ Speak for up to 30 seconds at one time.
^ Warning tone sounds five seconds before limit.
3 Press b to toggle Loudspeaker on/off
Release l when finished
5
^ The floor is released automatically when the time is up.
6 To speak again, press and hold l when o
Press and Hold appears.
^ o :Own appears when you have the floor.
^ Busy appears if the floor is taken; try again later.
7 Press g to exit
^ Circle Talk ends automatically when there is only one
participant left, including yourself.
Direct Entry
A Press l
3 Enter a phone number
on P.20-8
A
Perform from Step 3
1 Total Number of Participants
2 Participants
3 Circle Talk Status
4 Connection Status
Rejoining Circle Talk
3 In Standby, press B/A to open Dialled Numbers/
A
Received Calls Select the most recent Circle Talk
A Press N x A
record
Press b
^ An error message appears when all other participants have
exited or 11 participants are already engaged.
Incoming Calls/Alarm during Circle Talk
3 Handset responds to incoming calls according to Incoming
Calls settings (P.20-11).
3 Alarm Times are announced after exiting Circle Talk.
Window Description
1
2
3
A
Select Rejoin Circle Talk
4
20
20-9