SoftBank 815T User Manual page 81

1
In a text entry window, move the cursor to the first
character of the text range →J (Range ・ paste)
2
Select Start →@→ Move the cursor to the last
character of the text range →@
3
Select To Phone Book →@→ Add New/Add →@
Note
If a selected item contains characters or symbols that cannot be saved
7
to Phone Book, it won't be saved to Phone Book.
Tip
Even if selected numbers contain "
7
recognized as a telephone number. However, "/( )" will be omitted
when they are saved.
Replacing Previously Converted Text
Select previously converted text and replace it. However, kanji and pictographs
cannot be replaced collectively.
1
In a text entry window, move the cursor to the first
character of the text range →J (Range ・ paste)
2
Select Start →@→ Move the cursor to the last
character of the text range →@
3
Select Convert →@
Converting Hiragana to Kanji
Select Kana/Kanji →@→Select the conversion candidates→ @
/P-+( )" in between, they will be
*#
Convert All into Full Width
Select Full Width →@
Convert All into Half Width
Select Half Width →@
Convert All into Upper Case
Select Upper Case →@
Convert All into Lower Case
Select Lower Case →@
Replacing Text with Text Saved to the Clipboard
Replace selected text with text saved to the clipboard (page 3-13).
1
In a text entry window, move the cursor to the first
character of the text range →J (Range ・ paste)
2
Select Start →@→ Move the cursor to the last
character of the text range →@
3
Select Replace →@→ Select a character to replace
from the clipboard →@
Deleting
1
In a text entry window, move the cursor to the first
character of the text range →J (Range ・ paste)
2
Select Start →@→ Move the cursor to the last
character of the text range →@
3
Select Delete →@
3
3-15