SoftBank 815T User Manual page 43

7 If the message Please check connection with your charger appears,
clean the External Device Port and battery pack terminal with a dry cotton
swab, etc, and try again.
When the message still does not disappear, stop charging immediately,
and take the battery pack to your nearest SoftBank Shop or contact
SoftBank General Information (page 21-36).
7 Do not charge the battery pack in humid places.
7 The battery pack can be charged with the handset turned on.
7 When charging while your handset is turned on, "
display and turns to " " when charging is complete.
7 The handset and charger may warm during charging. However, if it
overheats, stop using immediately. There may be some defect.
7 If a call arrives while the handset is being charged, it sounds the ringtone,
vibrates, or flashes the external light in the same way as usual.
Inserting & Removing the Battery Pack
814T
" appears on the
815T ��* Coordinate Panel (bottom panel) is the battery cover for 815T.
1
Press down and slide battery cover ( ① ) and lift
out ( ② )
2
Align battery pack terminals with handset
terminals. Push battery in ( ③ )
●
To remove battery pack, lift battery pack up by tabs.
3
Re-attach battery cover ( ④ )
Note
Do not remove the battery pack while handset power is on. Using your
7
fingernail, lift out battery pack by the tab. Do not remove battery pack
in any other way.
����
����
1
1-13