Using Pause (P) in Touch Tone Sequences
The pause "P" allows you to send sequences of touch tones, each separated
with a pause "P". It is convenient if you register multiple touch tones such as
remote operation numbers of your home phone.
13
Saving Touch Tones to Phone Book
Example: Save the following three numbers.
Phone number
Answering machine code
Answering machine playback code : #1
1
Enter 03123XXXX3P#7777P#1 in Phone Number
field
●
For details on saving to Phone Book, see page 4-3.
Sending Touch Tones
1
Open a Phone Book entry containing the touch
tones
●
For details on how to access a Phone Book entry, see page 4-8.
2
Press N
A call is made to the phone number before the first "P".
3
Press @
The sequence of touch tones before the next "P" is sent.
●
Repeat this step until all the touch tones have been sent.
13-46
: 03-123X-XXX3
: #7777
Using the Stereo Earphone (optional)
Use Stereo Earphone (optional) for receiving/making calls. Earphone Switch is
convenient for one-touch access to incoming calls or set a number to make
one-touch calls to that number. Auto Answer setting is also available.
1
Open the earphone microphone jack cover ( ① )
2
Insert the plug for the Stereo Earphone into the
earphone/microphone jack ( ② )
Note
When plugging or unplugging the Stereo Earphone into/from the
7
earphone microphone jack, take care to ensure that the plug is parallel
to the jack.
Do not attempt to insert a Stereo Earphone plug with the incorrect
7
shape into the earphone microphone jack.
Use only the TSLAU1 Stereo Earphone (optional). It may not be possible
7
to plug third-party stereo earphones into this earphone microphone
jack, and some may be incompatible with the handset.
������