Phone Numbers - SoftBank 815T User Manual

Using Remote Lock to Lock the IC Card
Lock the IC card from a remote location.
● Before performing these procedures, first configure Mail Lock (page 20-6)
or Call Lock (page 20-6) settings and set Remote Lock to ON.
Using Mail Lock to Lock the IC Card
1
Create a message with a preset password for the
subject, and send the message
● Do not enter anything for any of the other fields of the message.
IC Card Lock will turn on when the message is received.
If there is a lock notification address (page 20-6) specified, a
message will be sent to the address informing the recipient that IC
Card Lock was turned on.
Note
If the handset is unable to receive mail for some reason, IC Card Lock
7
will not be turned on even if you send a Mail Lock message.
Releasing Remote Lock
Set IC Card Lock (page 20-5) to OFF to release Remote Lock.
Using Call Lock to Lock the IC Card
1
Place a call to the handset from one of the preset

phone numbers

2
Hang up the phone
●
Repeat the procedure until you reach the number of times you preset
for Call Lock settings (page 20-5) within three minutes. Each of the
calls must be unanswered.
Note
The current incoming call count is cleared (becomes zero) whenever any
7
one of the following occurs.
・ If a call is received from another preset phone number
・ If a call placed to the handset is answered
・ If the handset is turned off
・ If the number of incoming calls does not reach the preset number
within three minutes
If Call Lock is performed while a video call is in progress, IC Card Lock
7
will turn on but there will be no message to tell that the IC card has
been locked.
Call Lock cannot be performed while a voice call is in progress and Call
7
Waiting (page 14-6) is set to OFF.
Tip
When the number of calls reached to the preset number, a message
7
informing that the IC card has been locked plays.
20
20-7