Software Updating - Pioneer MCS-737 Operating Instructions Manual

80 Advanced settings
En

Software updating

The player's software can be updated using
one of the methods shown below.
Connecting to the Internet.
Using a USB flash drive.
Product information on this player is provided
on the Pioneer website. Check the website
shown on page 10 for update and service
information on your Blu-ray disc player.
Caution
Do not unplug the power cord or remove the USB
flash drive during software updating. Also, do not
reboot by pressing the
5 seconds or longer. Otherwise, the updating will
be aborted and malfunction may occur with the
player.
There are two processes for software updating,
downloading and updating. Both processes may
take a certain period of time.
Other operations are defeated during software
updating. Furthermore, updating process cannot
be canceled.
Updating connecting to the Internet
1. Connect to the Internet.
2. When playback is stopped, display the
Home Menu screen.
Press
HOME MENU.
3. Select and set Initial Setup.
Use / to select, then press ENTER.
4. Select and set Options
Network
Use / / / to select, then press ENTER.
5. Updating starts.
Press ENTER.
Software updating may take a certain
8
period of time.
restarts automatically.
STANDBY/ON button for
Update
Start.
Updating using a USB flash drive
Note
website, use your computer to download it
onto a USB flash drive. Carefully read the
instructions on downloading update files
provided on the Pioneer website.
Store the update file in the root directory of the
USB flash drive. Do not store it within a folder.
Do not put any files other than the update file
on the USB flash drive.
The player supports USB flash drive formatted
flash drive on your computer, do so with the
settings below.
– File system: FAT32
– Allocation unit size: Default allocation size
Only store the most recent update file on the
USB flash drive.
Do not use a USB extension cable to connect
a USB flash drive to the player. Using a USB
extension cable may prevent the player from
performing correctly.
1. Plug in the USB flash drive on which
the update file is stored.
2. When playback is stopped, display the
Home Menu screen.
Press
HOME MENU.
3. Select and set Initial Setup.
Use / to select, then press ENTER.
4. Select and set Options
USB Storage Start.
Use / / / to select, then press ENTER.
5. Updating starts.
Press ENTER.
Software updating may take a certain
period of time.
restarts automatically.
Update