Introduction - Eaton EX 2200 RT 2U Installation And User Manual

Thank you for selecting an EATON product to protect your electrical equipment.
The EX range has been designed with the utmost care.
We recommend that you take the time to read this manual to take full advantage of the many features of your UPS
(Uninterruptible Power Supply).
Warning: This is a class A UPS product. In a domestic environment, this product may cause radio interference, in which
case, the user may be required to take additional measures.
If the device must be installed in overvoltage category III or IV environments, additional upstream overvoltage protection
must be provided for.
Before installing EX, please read the booklet on the required safety instructions. Then follow the indications in this
manual.
To discover the entire range of EATON products and the options available for the EX range, we invite you to visit our web
site at www.eaton.com or contact your EATON representative.
Environmental Protection
EATON has implemented an environmental-protection policy.
Products are developed according to an eco-design approach.
Substances
This product does not contain CFCs, HCFCs or asbestos.
Packing
To improve waste treatment and facilitate recycling, separate the various packing components.
The cardboard we use comprises over 50% of recycled cardboard.
w
Sacks and bags are made of polyethylene.
w
Packing materials are recyclable and bear the appropriate identification symbol.
w
Material
Polyethylene terephthalate
High-density polyethylene
Polyvinyl chloride
Low-density polyethylene
Polypropylene
Polystyrene
Follow all local regulations for the disposal of packing materials.
End of life
EATON will process products at the end of their service life in compliance with local regulations.
EATON works with companies in charge of collecting and eliminating our products at the end of
their service life.
Product
w
The product is made up of recyclable materials.
Dismantling and destruction must take place in compliance with all local regulations concerning waste.
At the end of its service life, the product must be transported to a processing centre for electrical and electronic waste.
Battery
w
The product contains lead-acid batteries that must be processed according to applicable local regulations concerning
batteries.
The battery may be removed to comply with regulations and in view of correct disposal.
The «Material Safety Data Sheets» (MSDS) for the batteries are available on our web site*.
(*) For more information or to contact the Product Environmental manager, please visit our website: www.eaton.com/
pulsar.
Abbreviation
PET
HDPE
PVC
LDPE
PP
PS

Introduction

01
PET
Symbol
01
number
PET
01
02
03
04
05
06
86-86710-00EN A02 - Page 5