Tekno RC EB48.2 Manual
  1. Manuals
  2. Brands
  3. Tekno RC Manuals
  4. Motorized Toy Car
  5. EB48.2
  6. Manual

Tekno RC EB48.2 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EB48.2 and is the answer not in the manual?

Questions and answers

Related Manuals for Tekno RC EB48.2

Summary of Contents for Tekno RC EB48.2

  • Page 2 Introduction Thank you for purchasing the Tekno RC EB48.2 1/8th Electric 4WD Competition Buggy. The EB48.2 represents the state-of-the-art in 1/8th Electric Buggy technology. We hope you have as much fun driving your new vehicle as we did developing it. We are always working on new projects, so please check our website (www.teknorc.com) regularly for the latest news, parts, and kits.
  • Page 3 Bag A Center Differential (overview) TKR5112X TKR5150 TKR5113 TKR5143 TKR5149 TKR5150 TKR5237 *TKR5115 *TKR5237K (Option) TKR5112X Step Step TKR5145 TKR5144 TKR5150 Grease TKRBB08165 Grease Step Grease TKR1325 Step M3x14mm Flat Head Screw TKR5144 Differential 0-rings TKR1325 x4 TKR5144 TKR5145 TKR5145 Grease Differential Shims (6x17mm) Fill with 7000 wt oil to...
  • Page 4 Bag B Front/Rear Differential (overview) TKR5114X TKR5151 TKR5150 TKR5143 TKR5149 TKR5150 TKR5113 TKR5114X Step TKR5145 Note: Repeat for rear di Step TKR5144 Note: Repeat for rear di TKR5150 Grease TKRBB08165 Step Grease Note: Repeat for rear di TKR1325 Step M3x14mm Flat Head Screw Note: Repeat for rear di Grease TKR1325 x4...
  • Page 5 Bag C Front Gearbox TKR5012 TKR5028 TKR1603 (overview) TKRBB05114 TKR1222 TKR5075 TKR5152 TKR5012 Step TKR1603 Note: at spot TKRBB05114 Front Note: The front and rear of the car use di erent inner TKRBB05114 bulkheads. The front is angled Thread whereas the rear is straight. Lock Note: at spot TKR5152...
  • Page 6 Bag D Rear Gearbox TKR1603 TKR5029 (overview) TKRBB05134 TKR1222 TKR5026 TKR5152 TKR5075 TKR5016B TKR5016B TKR1603 Note: at spot TKRBB05134 Step Front Note: The front and rear of TKRBB05134 the car use di erent inner bulkheads. The front is angled whereas the rear is straight. Thread TKR5152 Lock...
  • Page 7 Bag E Middle hole is stock position Wing Mount Most least downforce downforce TKR1524 TKR5026 Step TKR1524 Step TKR1221 TKR1529 TKR1221 TKR1201 TKR1201 M3 Lock Nut Black TKR1529 TKR1529 TKR1221 M3x8mm Washer TKR1524 M3x12mm Cap Head Screw TKR1529 M3x20mm Cap Head Screw...
  • Page 8 Bag f Rear Suspension (overview) TKR5021 TKR1333 TKR5021 TKR5013B TKR5013 TKR5021 TKR5020 TKR1327 TKR5030XT TKR5033 TKR1402 TKR5056 TKR5079A TKR5049A TKR1525 Step TKR1402 TKR1327 M3x16mm Flat Head Screw TKR1525 TKR1443 TKR1333 M3x40mm Flat Head Screw Step TKR1402 M3x8mm Button Head Screw TKR1333 TKR1333 TKR1443...
  • Page 9 Bag f Rear Sway Bar TKR5084 - 2.6mm TKR5084 (Option) *TKR5080 - 2.2mm *TKR5081 - 2.3mm *TKR5082 - 2.4mm *TKR5083 - 2.5mm *TKR5085 - 2.8mm Step *TKR5087 - 3.0mm TKR1601 Note: Do not over-tighten 30.2 TKR1601 Step Thread Lock TKR5086 TKR1522 TKR1522 TKR1522...
  • Page 10 Bag G Rear Hub/CVA Assembly TKR5072 TKR5073 TKR5070 Note: notch on pin TKR5040 needs to line up with set screw. TKR5073 Step TKRBB08165 TKR5071 Grease *TKR5071X *TKR5071B *TKR5071C TKRBB13194 (Option) TKR1603 Thread Lock Step Note: TKR5040 hubs are left/right interchangeable TKR1201 TKR1201 TKR5034...
  • Page 11 Bag G Rear Camber Links This side mounts on shock tower TKR5051 Note: ange TKR5052A This side mounts on hub TKR5051 Note: no ange Left Right TKR5053A TKR5053A TKR5050 TKR5050 TKR5051 Step This side mounts on shock tower Note: ange This side mounts on hub TKR5051 Note: no ange...
  • Page 12 Bag H TKR5020 TKR5021 Front Suspension (overview) TKR1327 TKR5017 TKR5021 TKR5079A TKR5056 TKR5049A TKR1333 TKR1525 TKR5017 TKR5036XT TKR1443 TKR1525 Step TKR1443 Step Stock Position TKR1327 M3x16mm Flat Head Screw TKR1327 TKR1327 TKR1333 M3x40mm Flat Head Screw TKR1443 M4x10mm Button Head Screw TKR1525 M3x14mm Cap Head Screw TKR1333...
  • Page 13 Bag H Front Sway Bar TKR5083 - 2.5mm TKR5083 (Option) *TKR5080 - 2.2mm *TKR5081 - 2.3mm *TKR5082 - 2.4mm *TKR5084 - 2.6mm *TKR5085 - 2.8mm *TKR5087 - 3.0mm Step TKR1601 Note: Do not over-tighten 30.2 TKR1601 Step TKR1601 Thread TKR5086 Lock TKR1522 TKR1601...
  • Page 14 Bag I Front Steering TKR1445 TKR5042 TKR5073 Note: notch on pin TKR5070 TKR5054A needs to line up TKR5072 with set screw. TKRBB13194 TKR5041 Step TKR5073 Grease TKR5071 *TKR5071X *TKR5071B *TKR5071C (Option) M3 x6mm button TKRBB08144 head screw can be used as a TKR1603 steering stop if desired.
  • Page 15 Bag I Front Camber Links This side mounts on shock tower TKR5051 Note: ange This side mounts on hub TKR5052A TKR5051 Note: no ange Left Right TKR5053A TKR5053A TKR5050 TKR5050 TKR5052A This side mounts on shock tower TKR5051 Note: ange This side mounts on hub TKR5051 Note: no ange...

  • Page 16: Steering Assembly

    Bag J TKR5100 TKR5056 Steering Assembly TKR5056 (overview) TKR5056 TKR5123 TKR5123 TKR5052A TKR5056 TKR5052A TKR5104 TKR5052A TKR5104 TKR5122 TKR5104 TKR5101X TKR5231 TKRBB06103 Thread TKR1323 Lock Step Step Note: Tighten nut all the way down, then back it o 4 full turns TKRBB050825 Note: Apply a small drop of oil for easy...
  • Page 17 TKR1443 Bag K Front End Assembly Thread Lock Step Step TKR5121 TKR5107 Note Step K-2: Line up the bottom of the steering posts (TKR5102A) with the corresponding recess TKR5102A cut in the chassis. TKR1323 TKR1443 Step Note: Inititial bumpsteer setting is two washers above and below the steering ball link.
  • Page 18 Bag L TKR1522 Center/Rear Assembly Thread Lock TKR5107 TKR5210 *TKR5210X (Option) Step *TKR5115 Note: If running Traktion Drive or Electri-Clutch slipper systems, reverse di direction as shown above. *Metal spur gear highly recomended! TKR5107 *TKR5217 (Option) (Direct drive - Mod 1 pinion position) TKR5077 TKR1443 Step...
  • Page 19 For both front and rear shocks The following steps and information will provide you with the proper way to ll and bleed your Tekno RC EB48 shocks. After thorough testing, we've found it's easiest to complete steps 1 through 3 on each shock before moving onto step 4.
  • Page 20 Bag M Step Front Shock Assembly Note: front shocks use shorter shock bodies - TKR6002, Note: shorter shock shafts - TKR6004, TKR1200 shaft guide TKR6015 shorter springs - TKR6035 orientation TKR6008 and shorter shock boots - TKR6023 *TKR6050 *TKR6051 TKR6008 *TKR6052 TKR6009 *TKR6053...
  • Page 21 Bag N Step Rear Shock Assembly Note: rear shocks use Note: longer shock bodies - TKR6016, TKR1200 shaft guide longer shock shafts - TKR6017, TKR6015 orientation longer springs - TKR6034 TKR6008 *TKR6050 and longer shock boots - TKR6023 *TKR6051 TKR6008 *TKR6052 TKR6009 *TKR6053...

  • Page 22: Final Assembly

    Bag O ESC (not included) TKR1525 Final Assembly TKR1221 Step double sided tape Steering servo (not included) TKR5060 TKR5065 Step *TKR5060C (Option) TKR5125 TKR5065 Note: CA glue 3 black o-rings (TKR5125) to the bottom legs of the ESC tray. Step TKR1525 TKR1525 TKR1221...
  • Page 23 TKR1322 M3x8mm Flat Head Screw TKR1445 Step TKR1341 Note: Install MOD1 M4x6mm Flat Head Screw pinion (TKR4171-4190) or Tekno RC Traktion TKR1227 Drive / Elektri-Clutch slipper system (TKR4301X) at this TKR1343 M4x10mm Flat Head Screw step. Adjust gear mesh and tighten screws Thread (TKR1445) well.
  • Page 24 Bag P TKR5058A Final Assembly TKR5056 Step TKR5230 .5mm TKR5056 TKR5058A TKR1407 TKR1201 TKR1221 Step TKR1221 TKR1325 Step TKR1201 M3 Lock Nut Black TKR1221 M3X8mm Washer TKR1325 M3x14mm Flat Head Screw TKR1407 M3x16mm Button Head Screw TKR5058A Pivot Ball M3x5.8mm No Flange Note: O set servo arm so it is parallel with the connecting arm at neutral or zero servo position.
  • Page 25 Bag Q TKR1220 TKR1325 TKR5026 Wing/Wheels/Body TKR1220 TKR5026 Step TKR5037 *TKR5037B *TKR5037Y TKR1201 (Option) Step TKR5116 *TKR5116B *TKR5116C (Option) Step Note: It may be necessary to cut holes in the body for ventilation. TKR1201 M3 Lock Nut Black TKR1235 TKR1325 M3x14mm Flat Head Screw TKR1235 Body Clip...
  • Page 26 TKR5115 – Spur Gear (44t, hardened steel, lightened) TKR5000 Spare Parts List TKR5150 – Di erential Gear Set (internal gears only) TKR5000 - EB48 Electric 1/8th Scale 4WD Buggy Kit TKR5149 – Di erential Cross Pins (6pcs) TKR5000F – Chassis (7075, hard anodized) TKR5143 –...
  • Page 27 Bag R A mechanical brake setup will allow you to adjust the front/rear brake bias as well as reduce the running temperature of your motor and ESC. Mechanical Brakes Mechanical brakes can provide an advantage on tracks where traction is (optional - TKR5206X) scarce, but it may suit your driving style in any case.
  • Page 28 TKR1601 Bag R Step Thread TKR5222 Lock Mechanical Brakes TKR5222 TKR1601 (optional - TKR5206X) TKR5222 TKR5058 Step TKR1525 TKR5222 TKR5220 TKR1221 TKR5056 TKR5067 TKR5065 TKR1525 Radio Setup: TKR1201 · Step You need a separate servo for the brakes. TKR1525 A servo with at least 160oz/in torque @ .15sec TKR1221 or faster is recommended.
  • Page 29 SETUP SHEET Name: Date: Event: Track Conditions: Outdoor Open Loose/Loamy Dusty High Bite Low Bite Rough Indoor Tight Smooth Hard Packed Med Bite Blue Groove BUMPSTEER/ACKERMANN/SERVO SAVER SHOCKS Front Rear Piston stock stock FRONT SUSPENSION Front Rear Bladder stock stock Ride Height Spring Tekno red...
  • Page 30 SETUP SHEET Name: Date: Event: Track Conditions: Outdoor Open Loose/Loamy Dusty High Bite Low Bite Rough Indoor Tight Smooth Hard Packed Med Bite Blue Groove BUMPSTEER/ACKERMANN/SERVO SAVER SHOCKS Front Rear Piston stock stock FRONT SUSPENSION Front Rear Bladder stock stock Ride Height Spring Tekno red...
  • Page 31 SETUP SHEET Name: Date: Event: Track Conditions: Outdoor Open Loose/Loamy Dusty High Bite Low Bite Rough Indoor Tight Smooth Hard Packed Med Bite Blue Groove BUMPSTEER/ACKERMANN/SERVO SAVER SHOCKS Front Rear Piston stock stock FRONT SUSPENSION Front Rear Bladder stock stock Ride Height Spring Tekno red...
  • Page 32 Tekno RC 10755 Scripps Poway Pkwy #598 San Diego CA 92131 www.teknorc.com...

Table of Contents